About GLORYSTAR VS/VA Series
| ITEM | 3015 | 4015 | 4020 | 6015 | 6020 | 6025 |
| Max material width（mm） | 3000*1500 | 4000*1500 | 4000*2000 | 6000*1500 | 6000*2000 | 6000*2500 |
| X-axis travel（mm） | 1520 | 1520 | 2020 | 1520 | 2020 | 2520 |
| Y-axis travel（mm） | 3030 | 4030 | 4030 | 6030 | 6030 | 6030 |
| Z-axis travel（mm） | 290 | |||||
| X/Y axis positioning accuracy | ≤0.03mm/m | |||||
| X/Y axis repeat positioning accuracy | ≤±0.02mm | |||||
| Max. synthetic positioning speed | 100m/min | |||||
| Max. acceleration | 1.2G | |||||
| Cutting kerf width | 0.1mm-0.5mm（Actual measured value of plate thickness <3mm） | |||||
| Cutting surface roughness | Ra3.2um- Ra25.4um（Actual measured value of plate thickness <3mm） | |||||
| Max cutting thickness range | Refer to the following process parameter table | |||||
| Min setting unit | 0.001mm | |||||
| Machine tool footprint(mm） | 9800*4500 | 12000*4500 | 12000*5000 | 16150*4500 | 16150*5000 | 16150*5000 |
| Host volume(mm) | 8800*2700* 1800 | 10700*2700* 1800 | 10700*3200* 1800 | 15150*2700* 1800 | 15150*3200 *1800 | 15150*3700* 1800 |
| CNC system | Cypcut | |||||
| Monitor | 27″LCD | |||||
| Transmission Mode | Double driver system with Pinion & Rack | |||||
| Worktable max. weight capacity (T) | 1.4 | 1.88 | 2.5 | 2.8 | 3.7 | 4.7 |
| Total installed power consumption (approximately) | 1000W | 15KW | 8000W | 55KVA | ||
| 1500W | 20KW | 12000W | 65KVA | |||
| 2000W | 22KW | 15000W | 80KVA | |||
| 3000W | 27KW | |||||
| 6000W | 42KW | |||||
| Power requirements | AC380V,50Hz;3P+N+PE | |||||
| Total power protecting level | IP54 | |||||
| The products provided by the company are optimized and upgraded from time to time according to the research and development process. This technical description is suitable for most models. | ||||||
| •Specification is subject to change without further notice. | ||||||
Malaysia
