| S | D | G | C | V | |
| Filter type | Solid particles | Solid particles | Oil aerosol & solid particles | Oil aerosol & solid particles | Oil vapor |
| Test method | ISO 12500-3 | ISO 12500-3 | ISO 12500-1 ISO 8573-2 | ISO 12500-1 ISO 8573-2 | ISO 8573-5 |
| Inlet Oil Concentration (mg/m³ ) | NA | NA | 10 | 10 | 0.01 |
| Count efficiency (% at MPPS) | MPPS=0.1 μm 99.81 | MPPS=0.06 μm 99.97 | NA | NA | NA |
| Count efficiency (% at 1 μm) | 99,97 | 99,999 | NA | NA | NA |
| Count efficiency (% at 0,01 μm) | 99,87 | 99,992 | NA | NA | NA |
| Max oil carry-over (mg/m³) | NA | NA | 0.1 | 0.01 | 0.003 |
| Dry pressure drop (mbar) | 120 | 140 | 120 | 140 | 160 |
| Wet pressure drop (mbar)* | NA | NA | 205 | 240 | NA |
| Wet pressure drop (mbar), in typical compressor installation | NA | NA | 185 | 200 | NA |
| Element service | After 4.000 operating hours or 1 year or pressure drop > 350 mbar | After 4.000 operating hours or 1 year or pressure drop > 350 mbar | After 4.000 operating hours or 1 year | After 4.000 operating hours or 1 year | After 1.000 operating hours ( at 20°C.) or 1 year |
| Precede with | - | S | water separator | G | G & C |
