Cascadian Flintkote 5 Bitumen Emulsion

Penerangan

Cascadian Flintkote 5 Bitumen Emulsion

Price: USD 605/-(FOB, Pasir Gudang, in A+ Drums. Valid until 04/05/2013) USD 575/-(FOB, Pasir Gudang, in A   Drums. Valid until 04/05/2013)

Cascadian Flintkote 5 Bitumen Emulsion is a single-pack, fibrated and stable water-borne emulsion which cures to form a firm and flexible bitumen waterproofing membrane. Cascadian Flintkote 5 is designed for use on horizontal and vertical surface. Cascadian Flintkote 5 is suitable for use as waterproof membrane on concrete, asbestos cement, roofing felt, mastic asphalt, slates, tiles and metal surface.

USAGE

• Waterproofing Typical applications will include concrete roofs,
       asbestos cement roof, exposed metal roofs, rejuvenation of asphalt
       roof, retaining walls, external concrete walls, above-grade floor slabs,
       bathrooms, kitchens, balconies and planter boxes.



• Insulation Provides a vapour barrier for cold
       storage rooms, mushroom houses and similar
       installations. Suitable for application in food stores.



• Concrete Protection To protect concrete from
       carbonation, spalling and sulphate attack.



• Metal Protection As a protective coating against corrosion
       of pipes, structural steelworks and other metallic equipment.
  
  
  ADVANTAGES
• Easy to apply by brush, trowel and sprayer.


• Built-in short fibre enhances the membrane’s toughness and durability.


• Forms a seamless and lap free membrane over the substrate.


• Water-based and non-toxic.


• Cures to form a flexible resilient waterproofing barrier over a wide range of temperatures.


• No flow or sagging of the film at elevated temperatures even on vertical surface.


• Cures to form a flexible resilient waterproofing barrier over a wide range of temperatures.


• Excellent adhesion to the concrete substrate prevents lateral migration of water under.


• Can be applied to damp surface without standing water such as green concrete surface.
  
  
  STANDARD COMPLIANCE


• ASTM D1227-79 Type 4: American Standard For Emulsified
       Asphalt Used as Protective Coating for Roofing



• SS-133: Singapore Standard For Bitumen Emulsion For Roof Waterproofing
  
  SPECIFICATION CLAUSE
  Liquid applied bituminous waterproof membrane where shown
  on the drawings shall be Cascadian Flintkote 5 bitumen emulsion
  obtained from Cascadian . It should be used in accordance with
  Cascadian’s current product data sheet.
  
  
  APPLICATION INSTRUCTION
• Surface Preparation
       Surfaces shall be dry, clean and free from dust, dirt, oil, grease,
       moss and loose material.


• Priming
       1) a coat of 1:1 mixture of Cascadian Flintkote 5 and water or
       2) Cascadian Flintkote PF-4 Bitumen Paint or Cascadian Flintkote
            Penetration Primer at a coverage of 0.1 - 0.15 ltr/m2. Allow to dry
            prior to Flintkote 5 application. Metal surfaces must be primed with
            Cascadian Flintkote PF-4 Bitumen Paint or Cascadian Flintkote Penetration
            Primer at a coverage of 0.1 - 0.15 ltr/m2. Allow to dry prior to Flintkote 5 application.



• Membrane Application
       Stir the emulsion well before use. Cascadian Flintkote 5 may be
       applied by roller, brush or spray for a minimum of 2 coats. Allow to
       dry between coats and apply each coat at right angles to the previous
       coat. Cascadian Flintkote 5 normally cures within 24 hours of application.
       For maximum durability, the coating can be reinforced with Cascadian Flintkote
       FG4 fabric or equivalent. Protect from rain and frost until cured. For exposed
       surface subjected to direct sunlight, apply 2 coats of Cascadian Flintkote
       Aluminium or Cascadian Flintkote Decoralt on the cured membrane.
  
  COVERAGE
  Coverage rates will vary depending on the actual surface environment
  and application. The typical coverage is about 1.5litres/m2 for 2 coats
  application. A short-fibre reinforced bitumen emulsion for general
  waterproofing, concrete protection and metal protection.
  
  
  HEALTH AND SAFETY


• Flammability : Non-flammable


• Skin Contact : Occasional contact is unlikely to have any adverse
  effect except on particularly sensitive skin. As a general precaution,
  avoid repeated or prolonged contact. Remove skin contamination when
  wet with water. Use a proprietary hand cleaner if the product has dried.


• Eye Contact: Unlikely to cause damage, no special
  precautions are necessary. However, as eyes are a
  sensitive area, contact should be avoided. In the event of
  accidental contact, irrigate immediately with plenty of water.
  
  
  CLEANING OF TOOLS
  Clean immediately after use with water. Use kerosene or white spirit if
  the material has dried. During work, place tools in water when not in use.
  
  STORAGE
  A minimum of 12 months in original sealed
  containers stored under cover at temperature between
  5°C and 40°C. Must be protected from freezing conditions.
  
  
  Ancilliary Products


• Cascadian Flintkote PF-4 Bitumen Paint - 17 litre



• Cascadian Flintkote Penetration Primer - 18 litre
  
  Complementary Products


• Cascadian Flintkote Decoralt - 18 litre



• Cascadian Flintkote Aluminium Paint - 18 litre



• Cascadian Flintkote FG4 fabric - 1m x 100 m per roll
  
  (Note: Please confirm with the local Cascadian Company for product availability.)
  
  
  PRODUCT DATA SUMMARY (Property Test Typical Values)
  
  Colour Wet - Brown
  Colour Dry - Black
  Appearance Tick - smooth cream
  Solid Content - > 50%
  Specific Gravity - About 1
  Surface Drying Time - 4 to 6 hours, depending on temperature and humidity
  Coverage - 0.50 - 0.75 litre / m² per coat
  Flash Point Water-based - Non Flammable
  Heat Resistance - 100ºC. No flow,sag or blistering
  Water Vapour Transmission - ASTM E96 5g / m² / 24 hours
  Tensile Strength - Reinforced with FG4 ASTM D412 2 N / mm²
  Shore A Hardness - Reinforced with FG4 ASTM D2240 50
  Crack Bridging - Reinforced with FG4 ASTM C836 Able to bridge 2mm crack
  Chemical and Water Resistance - Resistant to water, alcohol, most salt solutions, some dilute acids and alkalis. Not resistant to oil, solvents and some detergent solutions
  
  Typical values may represent average values from samples tested.
  
  
  DRUMMING OPTIONS
  (Grade A+) Brand New Drum
  
  (Grade A) Recondition Drums . 
  External painted in Black   
  Internal washed and 100% cleaned
  
  (Grade B) Recondition Drums .
  External painted in Black
  Internal containing 2 to 3 Kg
  Foreign material .
  
  (Grade C) Recondition Drums .
  External unpainted .
  Internal containing 2 to 3 Kg Foreign material .

Lebih maklumat tentang Cascadian Asphalt Industries Sdn Bhd