REM (Torque Monitor): Pilihan Utama di Penang, Malaysia, Simpang Ampat iMS Motionet Sdn Bhd

Penerangan

Product outline

Convert real-time angle & rotation speed from rotary encoder of torque meter into output voltage.

You can use multi-channel oscilloscope to monitor
torque vs angle, torque vs rotation speed
in real-time.

It is also suitable for feedback control using voltage ouput.

Angle & rotation speed from rotary encoder can be monitored simultaneously at voltage -10+10V.

You can decide starting point using Z phase signal (UTM only) or external pulse signal

Angle output

λäγ

Output of rotation speed (3) (4)

؎ٶȤγ
*3. Able to measure from 1rpm onwards.
*4 .If there is no pulse input after 0.1 seconds, output will return to starting point (0V).

Specifications

Angle signal	10 to +10V
Rotation speed signal	10 to +10V
Resolution of voltage output	Approx. 1/50000 against ±10V
Non-linearity of voltage output	0.01%/FS
Responsitivity of voltage output	DC to 5kHz/3dB
Compensated temperature range	10 to +50
Temperature effect on span	0.005%FS/
Humidity	85%RH or less (non-condensing)
Power supply voltage	DC24V±15
Consumption current	0.04A or less
Dimensions	28(W)×78(H)×80(D) mm(Projections excluded)
Weight	Approx.120g

Attachments
Operation manual	1

Accessories

Model
CATM(R)21-M	Cable for connection UTM rotary encoder 2m
CATM(R)51-M	Cable for connection UTM rotary encoder 5m
CATM(R)321-MR	Cable for connection UTM rotary encoder 5m
CATM(R)351-MR	Cable for connection UTM rotary encoder 5m
CN91	Waterproof plasctic connector for UTM rotary encoder

External dimention

Download

Product catalogue(PDF)		REM catalogue(557 KB)

Lebih maklumat tentang iMS Motionet Sdn Bhd

REM (Torque Monitor)