INTEGREX e-1250V/8: Pilihan Utama di Penang, Malaysia, Johor Bahru (JB), Bayan Lepas, Iskandar Puteri MACHINE TERMINAL (PG) SDN BHD

Penerangan

Mazak Integrex e-1250V/8

DONE IN ONE operation of large workpieces

Fusion of machining centers and turning centers

INTEGREX e-V SERIES

Multi-tasking machine based on 5-axis machining center with turning function.
Pursuit of high-rigidity structure for machining capability and high-accuracy positioning.
High-accuracy milling by X and Y-axes at workpiece surface thanks to gate column construction.
High torque turning and high speed, high accuracy C-axis positioning.
Ergonomics design for improved operation .

Machine Specifications

Mazak Integrex e-1250V/8		Bed Length -
Capacity	Maximum Machining Diameter	1450 mm / 57.090 in
Capacity	Maximum Machining Length	1600 mm / 62.990 in
Main Spindle	Chuck Size	1000 mm / 40 in
	Maximum Speed	500 rpm
	Motor Output (30 minute rating)	40 kw / 53.3 hp
Milling Spindle	B-Axis Travel	150°
	Magazine Capacity	42
	Maximum Speed	10000 rpm
	Motor Output (30 minute rating)	37 kw / 50.0 hp
Feed Axes	Travel (X Axis)	1875 mm / 73.82 in
	Travel (Y Axis)	1250 mm / 49.21 in
	Travel (Z Axis)	1345 mm / 52.95 in

Integrex e-V Technology

Control Type: SmoothX

Intelligent Machine Functions

Active Vibration Control

Minimised vibration function for high-speed, high-accuracy machining and longer tool life.

Smooth Corner Control

Smooth cornering to reduce unnecessary acceleration/deceleration for improved finished surfaces and minimised cycle times.

Smooth Machining Configuration

(Convenient Parameter Setting and Fine Tuning Function) Machining time, finished surface smoothness and machining shape can be adjusted for improved productivity.

Intelligent Safety Shield

(Machine Interference Prevention) Functions for safe operation during machine setup and automatic operation.

Intelligent Thermal Shield

(Heat Displacement Control) Unique Mazak heat displacement compensation system.

Intelligent Balance Analyzer

(Unbalanced Table Detection and Analysis) Shows required weight and locations to eliminate unbalanced condition.

Mazak Voice Adviser

(Verbal Message System) Verbal support for machine setup and safe conditions confirmation.

Intelligent Maza-check

(High-Accuracy 5-Axis Calibration) Position misalignment and incline of the rotary axes can automatically be measured and compensated to realize high-accuracy 5-axis machining.

Intelligent Maintenance Support

(Comprehensive Maintenance Monitor) Useful information for improved preventative maintenance to prevent unexpected machine downtime.

Intelligent Performance Spindle

(Comprehensive Spindle Monitoring) Monitoring milling spindle status - designed to minimize downtime and improve preventative maintenance.

Variable Acceleration Control

New function which permits the faster acceleration capability of linear axes to be used whenever possible. The slower acceleration of the rotary axes is not used for all program commands,resulting in faster machining cycle times.

Series Characteristics

DONE IN ONE performance
150-degree B-axis tilt milling spindles
Powerful turning/C-axis spindles
Single-setup machining for large parts
Large capacity tool magazine

Lebih maklumat tentang MACHINE TERMINAL (PG) SDN BHD