KTX-WP91341242ZZZZ Contrast sensors SICK | Sensorik Automation SB: Pilihan Utama di Johor Bahru (JB), Malaysia Sensorik Automation Sdn Bhd

Penerangan

KTX-WP91341242ZZZZ | Part no.: 1078146

Contrast sensors

KTX Prime

Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Light source: LED, RGB
Sensing distance: 40 mm
Switching output: PNP
Light spot size: 3.9 mm x 0.9 mm
Connection type Detail: Male connector M12, 4-pin
Device type: Standard

Features

Special applications	Standard
Device type	Standard
Dimensions (W x H x D)	30 mm x 53 mm x 78.5 mm
Sensing distance	40 mm
Sensing distance tolerance	± 3 mm
Housing design (light emission)	Rectangular
Light source	LED, RGB 1)
Wave length	470 nm, 525 nm, 625 nm
Light emission	Long side of housing
Light spot size	3.9 mm x 0.9 mm
Light spot direction	Vertical 2)
Receiving filters	None
Teach-in mode	1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
Output function	Light/dark switching
Delay time	Adjustable
Special features	Long sensing distance
Delivery status	2-point teach-in
Parameter presettings	None

Mechanics/electronics

Supply voltage	10.8 V DC ... 28.8 V DC 1)
Ripple	≤ 5 Vpp 2)
Current consumption	< 100 mA 3)
Switching frequency	50 kHz 4) 5)
Response time	10 µs 6) 7)
Jitter	5 µs 8)
Switching output	PNP
Switching output (voltage)	PNP: HIGH = VS - 3 V / LOW = 0 V
Output current Imax.	100 mA 9)
Input, teach-in (ET)	Teach: U = 10 V ... < VS
Input, blanking input (AT)	Blanked: U = 10 V ... < Uv
Input, fine/coarse (F/C)	Coarse: U = 10 V ... < Uv
Input, light/dark (L/D)	Light: U = 10 V ... < Uv
Retention time (ET)	25 ms, non-volatile memory
Connection type	Male connector M12, 4-pin
Protection class	III
Circuit protection	UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression
Enclosure rating	IP67
Weight	94 g
Housing material	Plastic, VISTAL®
Optics material	Glass

1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) With light/dark ratio 1:1.
5) 1-point teach-in (color mode): 16 kHz.
6) Signal transit time with resistive load.
7) 1-point teach-in (color mode): 30 µs.
8) 1-point teach-in (color mode): 15 µs.
9) Total current of all Outputs.

Dimensional drawing

Adjustments KTS/KTX Prime

Connection diagram Cd-381

KTS/KTX Prime - setting the switching threshold (2-point teach-in)

KTS/KTX Prime - Setting the switching threshold (teach-in dynamic)

Sensing distance Sensing distance 40 mm