About STARVISION DX SERIES
| ITEM | UNIT | DX-2216/20 | DX-2716/20 | DX-3216/20 | DX-4216/20 | ||
| TRAVEL | X Axis | mm | 2.200 | 2.700 | 3.200 | 4.200 | |
| Y Axis | mm | 1,600 / 2,000 | |||||
| Z Axis | mm | 800(1,000-opt.) | |||||
| Distance From Spindle Nose To Table | mm | 150-950 (150-1,150-opt.) | |||||
| Distance Between Two Column | mm | 1,700 / 2,100 | |||||
| WORKING TABLE | Table Length | mm | 2.000 | 2.500 | 3.000 | 4.000 | |
| Table Width | mm | 1,400 / 1,700 | |||||
| Table Load | kg | 8.000 | 9.000 | 10.000 | 12.000 | ||
| T- Slot (Width x Number x Pitch) | mm | 22x7x180 / 22x9x180 | |||||
| SPINDLE | Spindle Taper | - | BT-50 / ISO-50 / CAT-50 | ||||
| Spindle Speed | rpm | 4,500(6,000-opt.) | |||||
| Spindle Motor (Cont./30 Minutes Rated) | kw | 18.5 (22-opt.) | |||||
| FEED | Rapid Traverse(X/Y/Z) | m/min | 24 / 24(20) / 15 | 18 / 24(20) / 15 | |||
| Cutting Feedrate | mm/min | 7.000 | |||||
| ACCURACY | Positioning Accuracy | mm | ±0.005 / 300 ; ±0.015 / Full travel | ||||
| mm | P0.03 | P0.035 | |||||
| Repeatability | mm | ±0.003 | |||||
| mm | Ps0.025 | P0.028 | |||||
| ATC | Tool Magazine Capacity | pcs | 32 (24/40/60-opt.) | ||||
| Max. Tool Size (Full Pocket/Next Pockets Empty) | mm | Ø125/245 | |||||
| Max. Tool Length | mm | 350 | |||||
| Max. Tool Weight | kg | 20 | |||||
| OTHER | Power Required | kva | 65 | 65 | 65 | 65 | |
| Pneumatic Input Pressure | kg/cm2 | 65 | |||||
| Machine Net Weight | tons | 19 / 21 | 21 / 23 | 23 / 25 | 27 / 29 | ||
| Floor Space (LxWxH) | m | 8.4x5.1(5.5)x4.7 | 9.4x5.1(5.5)x4.7 | 10.4x5.1(5.5)x4.7 | 12.4x5.1(5.5)x4.7 | ||
•Specification is subject to change without further notice. |
|||||||
|
|
|||||||
Malaysia
