INTRODUCTION:

• JG-10K electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components. The load frames are rigid constructed, providing superior axial and lateral stiffness.

1. Full digital control. The whole measuring and control system adopts the special controller, which can achieve the digital adjustment of zero point and gain of load, deformation and displacement, and it’s easy to operate and possesses the high reliability.
2. Possess the functions of storage, setting and loading for various kinds of parameters, which make it convenient to connect multiple transducers with one load frame.
3. Realize the close-loop control, and show the reference curve during the executive operator adjusting the close-loop parameters, so the user can observe the close- loop effect caused by the parameters.
4. Perfect graphic function to complete the functions of the reappearance, amplification, reduction, self-adaptation, lapping of the curves, display and print the curve at the appointed range, observe the coordinate of the test point.
5. Data processing supports automatic analysis and graphic man-machine mutual processing, which is convenient to check and compare the test results.
6. Multilevel identity management

I)Rigid and Reinforced Plastics/Composite:

• EN ISO 6259 - parts 1/2/3 Determination of tensile properties of thermoplastic pipes;
• EN ISO 527-1 - parts 1/2/3 Determination of tensile properties on plastics;
• ASTM D638 Standard Test Method for Tensile Properties of Plastics
• ISO 604 Plastics - determination of compressive properties
• ASTM D695- Plastics -- Standard Test Method for Compressive Properties of Rigid Plastics
• EN ISO 9969 Determination of ring stiffness on thermoplastic pipes;
• ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
• ASTM D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics;
• EN ISO 13968 Plastics piping and ducting systems -Thermoplastics pipes- Determination of ring flexibility;
• EN ISO 844 Determination of compression properties;

• BS EN ISO 10319 Geotextiles —Wide-width tensile test;
• ASTM D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods);
• JBT 8521(EN 1492-2): Textile slings. Safety. Round slings, made of man-made fibers, for general purpose use;
• ASTM D 6775-02 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material;

• ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials;
• ISO 6892 Metallic materials — Tensile testing — Method of test at ambient temperature;
• BS EN 10002-1 Determination of tensile properties on metals;
• BS EN 10002-5: Metallic materials — Part 5: Method of test at elevated temperatures;
• ASTM E21: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials;
• IS0 783: Metallic materials -Tensile testing at elevated temperature;
• EN ISO 7438 Determination of flexure tests on metals;
• ASTM F606: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets;
• ISO 14589: Blind rivets - Mechanical testing;
• SAE J429: Mechanical and Material Requirements for Externally Threaded Fastener;