Drystar 80/EH500 SSP & Silencer 200V 50 Hz NRY044000: Pilihan Utama di Kuala Lumpur (KL), Malaysia, Selangor, Sri Petaling Glovac Sdn Bhd

Penerangan

Overview

Drystar80 is the most cost effective introduction to basic dry pumping. It is available as a stand-alone unit for 80 m³h^-1repeatable pumping performance; or in a combination with the respected EH500 hydrokinetic drive mechanical booster, offering 500 m³h^-1displacement for applications where increased pumping speed and/or lower vacuum levels are required. Depending upon the application the Drystar80 can be supplied with mineral oil or PFPE lubrication.

Features and Benefits

- Specifically designed for demanding industrial applications.
- Industry proven, tried and tested.
- Consistent and repeatable performance.
- High and repeatable product quality.
- No oil changes and waste oil disposal.
- No disposal cost, environmentally friendly.

Technical Data

	Drystar 80/EH500
Peak Pumping Speed 50 Hz	390 m³h^-1 (230 cfm)
Peak Pumping Speed 60 Hz	471 m³h^-1 (277 cfm)
Ultimate Pressure	<3x10^-3 mbar
	(<2x10^-3 Torr)
Power @ ultimate pressure	4.3 kW
Motor Power	6.6 kW
Electrical supply	200-230V 3Æ 50/60Hz or 380-460V 3Æ 50/60Hz
Inlet connection	ISO100
Outlet connection	NW40
Cooling method	Water/Air
Cooling Water flow rate	1 lmin^-1
	(0.26 galmin^-1)
Max cooling Water supply pressure	8 bar (116 psig)
Cooling Water DP across pump	2.1 bar (30 psig)
Cooling Water temp	5-35 °C (41-95 °F)
Cooling Water inlet	½” Quick connect coupling
Cooling Water outlet	½” Quick connect plug
Purge gas pressure	0.5 bar (6-8 psig)
Purge gas light duty	15 slm
Purge gas connection	¼” Quick connect coupling
Weight	220 kg (485 lbs)
Noise (with exhaust silencer)	<78 dB(A)
Exhaust back pressure	1.3 bar (18 psig)
Lubrication volume	1.4 l (0.4 gal)
Hydrocarbon lubrication	SHC629 /
	Ultragrade 20
PFPE lubrication	YVAC 25/6 /
	YVAC 16/6

Lebih maklumat tentang Glovac Sdn Bhd