DKSB Engineering (M) Sdn Bhd provides reliable hydraulic jack repairing to fix oil leaks, weak lifting, and unstable load holding. Our repair work helps your jack return to safe, smooth operation with clear testing results. We support customers across Kuala Lumpur and Selangor.
Hydraulic jack repair focuses on restoring lifting performance and safety. We inspect the jack, replace worn parts where needed, and test it properly before returning it to service.
To speed up quoting and scheduling: share jack capacity (ton), brand/model, and photos of the nameplate and problem area.
Most jack problems start small and become bigger over time. Early repair helps avoid unsafe lifting and prevents deeper internal damage.
Worn seals or damaged surfaces can cause oil loss and weak lifting.
Using a jack above its rated capacity can shorten its service life quickly.
Contamination can affect valves and cause sticking or unstable holding.
Infrequent checks can allow small leaks and wear to become major failures.
Common warning signs: jack sinks under load, slow lifting, uneven lifting, visible oil leak, or unstable lowering.
We follow a clear repair workflow so you can understand what was repaired and why. The goal is safe lifting performance, not just “temporary fixing”.
Check symptoms: leakage, lifting speed, and load holding stability.
Open the jack safely and check seals, valves, and internal condition.
Replace worn seals/parts, clean where required, and refit carefully.
Test lift, hold, and controlled lowering to confirm safe operation.
Repair time depends on jack size, condition, and parts availability. We prioritize safe results and proper testing.
| Scope Item | Purpose | Notes |
|---|---|---|
| Leak inspection | Identify where pressure or oil is escaping | Helps prevent repeat issues |
| Seal replacement | Restore pressure, stop leakage, improve holding | Seal must match model and size |
| Valve checking / cleaning | Improve lifting response and stability | Useful when jack lifts slowly or sinks |
| Functional testing | Confirm safe lift/hold/lower performance | Important before returning to service |
Safety note: Always use proper support stands for heavy loads. A jack is for lifting—not for long-term load holding without safety supports.
Malaysia
