Tulips Drywall Screw
Tulips Drywall Screw is designed for fast, secure drywall fastening with consistent holding power. Use this page to select the right size, understand typical applications, and follow proven installation tips for clean finishes.
Drywall fastening Consistent drive Contractor-ready packing
What is the Tulips Drywall Screw used for?
Tulips Drywall Screw is commonly used to fasten drywall sheets during interior wall and ceiling installation. It supports efficient assembly and helps create a stable surface for finishing steps like taping, mudding, and painting.
Typical applications
- Residential drywall installation: Walls, ceilings, partitions, and renovations.
- Commercial fit-outs: Offices, retail interiors, and light construction projects.
- Repair work: Replacing damaged drywall sections and patching areas.
How do you choose the right drywall screw size?
Choose screw length based on drywall thickness and the type of framing behind it. As a rule of thumb, you want enough length to achieve a secure bite into the framing while keeping the head set cleanly without breaking the drywall paper.
Selection tips that prevent common issues
- Avoid “over-driving”: Set the head just below the surface for a smooth finish without tearing the paper.
- Match the job pace: If you’re using a screw gun, confirm the bit fit and consistent depth setting.
- Reduce rework: Consistent spacing and straight alignment make finishing faster and cleaner.
Example: For a high-traffic commercial interior, consistent screw depth helps minimize visible bumps and reduces sanding time.
Result: Faster finishing and a more uniform painted surface.
What sizes and packing are available for Tulips Drywall Screw?
The table below lists available sizes and their packing configuration. This is especially helpful for estimating purchase quantities and planning stocking for job sites.
| Size |
Packing |
| #6 x 3/4” |
200pcs/box x 100bxs/ctn |
| #6 x 1” |
200pcs/box x 100bxs/ctn |
| #6 x 1.1/4” |
200pcs/box x 72bxs/ctn |
| #6 x 1.1/2” |
200pcs/box x 60bxs/ctn |
| #6 x 2” |
200pcs/box x 42bxs/ctn |
How do you install drywall screws for the best finish?
Install drywall screws with controlled depth and consistent spacing to reduce cracks, pops, and visible imperfections. The goal is a secure hold with a smooth surface that’s easy to tape and finish.
Step-by-step best practices
- Plan your layout: Position sheets so seams land on framing for stable fastening.
- Start with alignment: Tack a few screws to hold the sheet flat before filling in the pattern.
- Set proper depth: Drive until the head is just below the surface—avoid tearing the paper.
- Keep spacing consistent: Even spacing helps prevent movement and finishing defects.
- Inspect and correct: Replace any stripped or mis-driven screws before taping.
Site note: For humid environments (like coastal areas or high-moisture rooms), coordinate screw choice with the board type and finishing system used on the project.
FAQ about Tulips Drywall Screw
These quick answers cover common questions buyers and installers ask when selecting drywall screws and planning job-site quantities.
Choose a length that provides a secure bite into the framing while allowing the head to set cleanly without damaging the drywall surface. Proper length helps reduce screw pops and improves finishing quality.
Use controlled torque and stop when the head is just below the surface. Over-driving is the most common cause of paper tear and weak holding.
Drywall screws are optimized for drywall attachment and finishing needs. For structural or heavy-load wood fastening, choose fasteners designed for that purpose and load rating.
Confirm the size, pieces per box, and boxes per carton so you can match job-site consumption and storage. This helps avoid shortages during installation and reduces leftover inventory.
Malaysia
