E.MIX Eco Base is high quality water resistant cement-based thin plaster especially intended for thin plastering or surface improvement works to concrete and block wall surfaces or as final coat on E.MIX Eco Render surface. E.MIX Eco Base can be used for general filling up and patching. A harden plastered surface can be smoothened with E.MIX Eco Finish, painted or wallpapered. Ceramic tiles can be fixed on the E.MIX Eco Base surface. E.MIX Eco Base should not be used on painted surfaces or floor. E.MIX Eco Base contains recycled material and is a green-labelled product endorsed by the Singapore Green Building Council.
USAGE :
Interior skim coat for wall and ceiling only:
– Ceiling o ALC block wall
– Plastered wall
– Rendered wall
– Concrete wall
– Block wall
FEATURES AND BENEFITS :
– Eco-friendly
– High workability
– High water resistance
– Compatible to cementitious E.MIX Eco series products
– Harden plastered surfaces can be smoothened with E.MIX Eco Finish
– Single component: fixed mixing proportion, ensure the quality of work
– Shrinkage compensated: reduce the chance of shrinkage cracks
PREPARATION :
– Ensure the substrate is clean, structurally sound, adequately true and level to achieve specified tolerances, free from contamination, loose particles, grease, lacquer, plastics or traces of foreign materials, and protrusions such as wood peels, nails, excess mortar or any joints with tolerance that cannot be covered by the thickness of plaster. • All cutting, chasing, fixing of concealed conduits, service outlets, fixing pads and the like and making good of the background are completed.
– All concrete surfaces should be properly cured prior to plastering.
– For spray application, substrate is to be moistened overnight and also at the time before commencement of spray operation. No stagnant or frequent water flow on substrate is allowed immediately prior to installation.
COVERAGE :
Approximately 1.5 kg/ m²/mm thick
Approximately 5.0 m² / 5 mm thick / 40 kg bag
Malaysia
