详情
Ready Stock!
Premium grade Ceramic Tile adhesive for internal and external area, mix with weber's range of Latex Admixture for Porcelain tile fixing.
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
- Spread adhesive to the substrate at bed thickness of 3 – 6 mm (may vary depending on tile size & thickness) with suitable notched trowel.
- Spread no more than 1m2 at a time to avoid Skin-Over.
- Promptly fix tiles onto adhesive bed, followed by slight twisting
- action to ensure good contact ie, Solid Bed Fixing.
- Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
- Allocate joints of approx. 2 – 3 mm wide between tiles.
- Remove surplus adhesive from tile surface & joints before it hardens.
- Set for 24 hours; before grouting commences.
- Premium grade C1 Tile Adhesive
- Excellent bond strength
- Contains 100% Silica sand filler
- Idea for swimming pool & wet area
- Bed thickness : 3 – 6mm
- Application temperature above 5°C-50°C
- Open time : Approx. 15 – 20 Minute
- Setting time is 24 hours
- Adjustability Time : 10 minutes – May vary depending on porosity of substrate.
- Mix Proportion : 1 pbw water to 3 pbw adhesive (6 – 7 ltrs Water or Latex Admixture to 20kg weberset super star)
- Shelf life : 6 month
更多 Tick Hong Hardware & Timber Sdn Bhd 相关资料
Malaysia
