SIKATOP® SEAL-109

SIKATOP® SEAL-109 
Polymer-modified, flexible, cementitious waterproofing coating

• Good crack bridging capability (up to 1 mm at +20 °C)
• Pre-batched components
• Mixes and applies easily

USAGE:

Waterproofing, sealing of hairline cracks and as a protective coating against aggressive elements such as carbon dioxide (for example, in concrete repair work), frost and de-icing agents. 

• Water tanks
• Basements
• Car park
• Terraces and balconies
• Retaining walls
• swimming pools
• Wet rooms
• RC gutters and planter boxes
• Bathroom floors and walls

ADVANTAGES:

• Good crack bridging capability (up to 1 mm at +20 °C)
• Pre-batched components
• Mixes and applies easily
• Easily applied by roller or brush
• Good adhesion to sound substrates
• Impermeable
• Increased frost and salt resistance
• Decreases carbon dioxide penetration
• Non-toxic, same as cement
• Flexible
• Resistant to freezing and thawing (-10 °C)
• Economical

COLOUR

PACKAGING

APPLICATION

Whilst the substrate is still damp but free from standing water, apply the first coat by brush, broom, roller or squeegee (if the surface is flat enough), working the material well into the substrate to achieve full bond.

Allow 4–8 hours (+20 °C) for the first coat to cure before applying the following coats in the same manner.

For large areas, SikaTop® Seal-109 MY can be applied by spray using a suitable worm type mixer/pump.

An additional stripe coat is recommended over cracks, wall/floor intersections, etc. as these locations are where movement is most likely to be expected in service.