Contactless Safety Door Switch SSR22: 马来西亚的首选 SEM Equipment Sdn. Bhd.

详情

ESPE safety door switches are used on fences of potentially dangerous machines and areas to monitor opening and closing of doors to ensure people safety protection.
Safety door switch is a kind of safety device, specialized for monitoring open/ close of protective mechanism (like safety fence door, protective cover).
SSR22 series safety door switch with RFID technology to ensure high safety and confidentiality.
The sensor & label support universal coding and unique coding.
Small size is better for mounting.

Model :

SSR22 series

Features :

Self-diagnose and cross-diagnose design: periodic mutual diagnose improve the safety level;
Independent and redundant output: In case any risk caused by single loop failure;
Magnetic holding force can reach 15N, which can replace the door magnet.

Dimension :

Wire Diagram :

Specifications :

Standard	ISO 13849-1（Cat. 4/PLe）;IEC/EN60947-5-1;IEC/EN60947-5-3
Power supply	DC24V±15%
Capacity	<1W
Response time	50ms
Risk time	50ms
Magnet holding force	>15N
Frequency	1Hz
OSSD output	PNP or NPN signal.Load below 200mA, residual voltage below 1V (except voltage caused bycable extension), leakage current below 1mA
Protective circuit	Overvoltage protection, power supply reverse polarity protection, and overcurrent protection
Encoding type	Universal encoding, unique encoding
Protection rate	IP65
Housing setectional size	48*30mm
Vibration resistance	Frequency 10Hz-55Hz, amplitude 0.35±0.05mm, 20 times each at X, Y and Z directions
Ambient working temperature	-10°C-55°C (no freezing)
Storage temperature	-30°C-70°C (no freezing)
Working humity	When temperature 20°C, humidity max 85%

更多 SEM Equipment Sdn. Bhd. 相关资料