74HC241: 马来西亚的首选 Utsource Holding Company Limited

详情

BUY 74HC241 https://www.utsource.net/itm/p/1039911.html
Octal buffer/line driver; 3-state

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	V_CC	2.0	-	6.0	V
Input Low Voltage	V_IL	-	0.8	-	V
Input High Voltage	V_IH	-	2.0	-	V
Output Low Voltage	V_OL	-	0.1	0.4	V
Output High Voltage	V_OH	2.4	-	-	V
Input Leakage Current	I_IL	-1	-	1	μA
Output Leakage Current	I_OL	-1	-	1	μA
Output Sink Current	I_OL	-	25	-	mA
Output Source Current	I_OH	-	-25	-	mA
Propagation Delay Time	t_pd	-	7	-	ns
Power Dissipation	P_D	-	-	100	mW
Operating Temperature Range	T_A	-40	-	85	°C

Power Supply:
- Connect the V_CC pin to the positive supply voltage (2.0V to 6.0V).
- Connect the GND pin to the ground.
Input Signals:
- Apply input signals to the data input pins (D0-D7).
- Ensure that the input voltages are within the specified range (V_IL and V_IH).
Output Signals:
- The output signals will be available on the data output pins (Q0-Q7).
- Ensure that the load connected to the output pins does not exceed the maximum output current ratings.
Enable Control:
- Use the enable control pin (G) to control the data transfer.
- When G is low (0V), the data from the input pins is transferred to the output pins.
- When G is high (V_CC), the outputs are in a high-impedance state.
Propagation Delay:
- The propagation delay time (t_pd) is the time it takes for the output to change after the input changes.
- Ensure that your system timing accounts for this delay.
Temperature Considerations:
- Operate the device within the specified temperature range (-40°C to 85°C) to avoid damage or performance degradation.
Power Dissipation:
- Monitor the power dissipation to ensure it does not exceed 100 mW to prevent overheating.
Handling Precautions:
- Handle the IC with care to avoid static discharge which can damage the device.
- Store the IC in an anti-static bag when not in use.

By following these instructions, you can ensure reliable operation of the 74HC241 buffer/line driver.

(For reference only)