详情
BUY (20PCS) DIP CARBON FILM RESISTOR 5% 5W 10Ω(10R) https://www.utsource.net/itm/p/12604656.html
| Parameter |
Value |
| Package Quantity |
20PCS |
| Type |
DIP Resistor |
| Material |
Carbon Film |
| Tolerance |
5% |
| Power Rating |
5W |
| Resistance |
10Ω (10R) |
Instructions:
- Handling Care: Handle the resistors carefully to avoid damage. Ensure they are not exposed to excessive heat, moisture, or physical stress.
- Installation: Insert the resistor into the circuit board ensuring correct orientation if specified. For this model, orientation is not critical as resistors do not have polarity.
- Soldering: Apply moderate heat when soldering; excessive heat can damage the component. Use a soldering iron set to an appropriate temperature for carbon film resistors.
- Mounting: Ensure the resistor is securely mounted and that there is no short circuit with adjacent components.
- Verification: After installation, verify the resistance value using a multimeter to ensure it matches the specified 10Ω within the 5% tolerance.
- Storage: Store unused resistors in a dry, cool place away from direct sunlight and sources of heat.
(For reference only)
更多 Utsource Holding Company Limited 相关资料
