Features and Benefits
-
Two flange sizes – The rotary joint is available with 125 mm (5 in) 250 PN (1500 lb) or 400 PN (2500 lb) inlet flanges and with optional 150 mm (6 in) Unibolt® or compact flange connections to match the drill stem connector
-
Cast single-piece gooseneck eliminates welds and reduces corrosion
-
Rotary joint drive options –
-
Air piston motor
-
Hydraulic
-
E-motor (with VFD)
-
Dual Seal
-
Increased reliability with a four-year design life
-
Switching from the primary seal to the secondary seal allows for planned maintenance in the event of a seal failure
-
Simple installation reduces downtime
-
Retrofit option for all Flowserve rotary joints
-
Rotary joint upgrade options
-
Convert packing to seal rings
-
Convert vertical air motor to horizontal motor with right angle gear
-
Upgrade Unibolt coupling to direct connect with drill stem
-
Add second bearing for right angle drive shaft
-
Convert to integral gooseneck and support cage
-
Add rotary joint stiffeners
Operating Parameters
Two models available:
-
Pressures to
-
205 bar (3000 psi)
-
430 bar (6230 psi)
-
Speeds of 2 to 17 rpm
-
Rotates 30 m (100 ft) to 45 m (140 ft) drill stem lengths
-
Carries axial hydraulic loads in the magnitude of 190 000 J (140 000 ft-lb) through its main thrust bearing
-
Seals hydraulic pressure against atmosphere
®Unibolt is a registered trademark of Cameron International Corporation
Malaysia
