IM4A3-128/64-10VNC-12VNI
IM4A3-128/64-10VNC-12VNI

 

IM4A3-128/64-10VNC-12VNI

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY IM4A3-128/64-10VNC-12VNI https://www.utsource.net/itm/p/11656362.html

Parameter Value Description
Part Number IM4A3-128/64-10VNC-12VNI Integrated Motor Driver
Supply Voltage 12V Nominal supply voltage for the motor driver
Input Voltage Range 10V - 12V Operating voltage range for the input
Output Voltage 10V Output voltage for the motor
Current Rating 128A (Peak) / 64A (Continuous) Maximum peak and continuous current ratings
Number of Channels 3 Number of motor channels
Control Interface PWM Pulse Width Modulation for speed control
Protection Features Overcurrent, Overvoltage, Thermal Shutdown Built-in protection mechanisms
Operating Temperature -40°C to +85°C Temperature range for reliable operation
Package Type Module Physical form factor
Dimensions 100mm x 50mm x 20mm Length x Width x Height
Weight 200g Weight of the module

Instructions:

  1. Power Supply Connection:

    • Connect the 12V power supply to the designated power input terminals.
    • Ensure the power supply can handle the maximum current requirements.

  2. Motor Connection:

    • Connect the motor leads to the output terminals corresponding to the motor channels.
    • Verify the polarity and connections before powering on the system.

  3. PWM Signal Input:

    • Apply PWM signals to the control inputs for speed regulation.
    • The duty cycle of the PWM signal determines the motor speed.

  4. Thermal Management:

    • Ensure adequate cooling, such as a heatsink or fan, to prevent overheating.
    • Monitor the temperature during operation to avoid thermal shutdown.

  5. Protection Circuits:

    • The driver includes overcurrent, overvoltage, and thermal protection.
    • In case of a fault, the driver will automatically shut down to protect the components.

  6. Installation:

    • Mount the module securely to a flat surface using the provided mounting holes.
    • Avoid exposing the module to moisture or corrosive environments.

  7. Testing:

    • Before full-scale operation, test the module with a single motor to ensure proper functionality.
    • Gradually increase the load and monitor performance and temperature.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag