M6242

BUY M6242 https://www.utsource.net/itm/p/12610377.html

Instructions for Using M6242

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V. The typical operating voltage is 5.0V.

2. Supply Current:

   • The device typically draws 10mA of current when powered at 5V with no load.

3. Output Voltage:

   • When the output is high, the voltage (VOH) should be between 2.4V and 5.0V.
   • When the output is low, the voltage (VOL) should be between 0V and 0.7V.

4. Input Voltage:

   • The valid input voltage range (VIN) is from 0V to 5.5V.

5. Propagation Delay:

   • The propagation delay (tpd) is the time it takes for the output to change state after the input changes. It ranges from 10ns to 50ns.

6. Temperature Ranges:

   • Storage Temperature (Tstg): The device can be stored in temperatures ranging from -65°C to 150°C.
   • Operating Temperature (Topr): The device can operate in temperatures ranging from -40°C to 85°C.

7. Handling and Installation:

   • Handle the device with care to avoid static damage.
   • Ensure proper soldering techniques to avoid thermal stress on the device.
   • Use appropriate decoupling capacitors near the power supply pins to ensure stable operation.

8. Application Notes:

   • Refer to the datasheet for specific application circuits and recommended operating conditions.
   • Ensure that all input signals are within the specified voltage range to prevent damage to the device.
   • Use pull-up or pull-down resistors as necessary to ensure stable logic levels.