2SC3568: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Below is the parameter table and instructions for the 2SC3568 transistor:

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Collector-Emitter Voltage	V_CEO	-	-	60	V	I_C = 150 mA, T_A = 25°C
Collector-Base Voltage	V_CBO	-	-	70	V	I_C = 0, T_A = 25°C
Emitter-Base Voltage	V_EBO	-	-	6	V	I_E = 5 mA, T_A = 25°C
Collector Current	I_C	-	150	300	mA	V_CE = 10 V, T_A = 25°C
Base Current	I_B	-	-	15	mA	V_CE = 10 V, T_A = 25°C
DC Current Gain	h_FE	40	100	300	-	I_C = 150 mA, V_CE = 10 V, T_A = 25°C
Transition Frequency	f_T	-	200	300	MHz	I_C = 150 mA, V_CE = 10 V, T_A = 25°C
Power Dissipation	P_T	-	-	1000	mW	T_A = 25°C
Junction Temperature	T_J	-	-	150	°C	-
Storage Temperature Range	T_STG	-55	-	150	°C	-

Mounting:
- Ensure that the transistor is mounted on a suitable heatsink if it will be operating at high power levels.
- Use thermal paste to improve heat transfer between the transistor and the heatsink.
Biasing:
- The base-emitter voltage (V_BE) is typically around 0.6 to 0.7 V for this transistor.
- Use a current-limiting resistor in series with the base to prevent excessive base current, which can damage the transistor.
Operating Conditions:
- Do not exceed the maximum ratings listed in the parameter table.
- Ensure that the collector-emitter voltage (V_CE) does not exceed 60 V.
- Keep the junction temperature (T_J) below 150°C to avoid thermal runaway.
Storage:
- Store the transistor in a dry, cool place away from direct sunlight.
- Handle the transistor with care to avoid static discharge, which can damage the device.
Testing:
- Use a multimeter to check the continuity and resistance between the pins before installing the transistor in a circuit.
- Test the transistor in a simple circuit to ensure it is functioning correctly.
Soldering:
- Use a low-wattage soldering iron to avoid overheating the transistor.
- Solder quickly to minimize heat exposure.

By following these instructions, you can ensure the reliable operation and longevity of the 2SC3568 transistor in your circuits.

(For reference only)