74LS593: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY 74LS593 https://www.utsource.net/itm/p/98359.html
8-BIT BINARY COUNTERS WITH INTPUT REGISTERS

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	V_CC	Operating	4.75	-	5.25	V
Output High Voltage	V_OH	I_O = -0.4 mA, V_CC = 5V	2.7	3.5	5.0	V
Output Low Voltage	V_OL	I_O = 8.0 mA, V_CC = 5V	0.0	0.4	0.5	V
Input High Voltage	V_IH	I_I = -0.4 mA, V_CC = 5V	2.0	3.5	-	V
Input Low Voltage	V_IL	I_I = 0.4 mA, V_CC = 5V	0.0	0.8	-	V
Propagation Delay Time	t_p	V_CC = 5V, T_A = 25°C	-	35	70	ns
Power Consumption	P_tot	V_CC = 5V, f_max = 1 MHz	-	150	-	mW
Storage Temperature	T_stg	-	-65	-	150	°C
Operating Temperature	T_A	-	0	-	70	°C

Power Supply:
- Connect V_CC to +5V and GND to 0V.
- Ensure that the supply voltage is within the specified range (4.75V to 5.25V) to avoid damage.
Input Signals:
- Apply logic high (V_IH) or low (V_IL) signals to the input pins.
- Ensure that the input voltages are within the specified ranges to prevent incorrect operation.
Output Signals:
- The output pins will provide logic high (V_OH) or low (V_OL) signals based on the input data.
- Ensure that the load connected to the output pins does not exceed the maximum current ratings.
Propagation Delay:
- The propagation delay time (t_p) is the time it takes for a change in the input signal to affect the output signal.
- This value should be considered when designing circuits to ensure proper timing.
Temperature Considerations:
- The device can operate within the temperature range of 0°C to 70°C.
- For storage, the device can withstand temperatures from -65°C to 150°C.
Power Consumption:
- The typical power consumption is 150 mW at V_CC = 5V and f_max = 1 MHz.
- Ensure that the power supply can handle the maximum power consumption.
Handling:
- Handle the device with care to avoid static damage.
- Use proper anti-static precautions when handling and storing the device.
Application Notes:
- The 74LS593 is a serial-in/parallel-out shift register with output latches.
- It can be used in applications such as LED drivers, data buffers, and other digital circuits where data needs to be shifted and stored.

By following these parameters and instructions, you can ensure reliable operation of the 74LS593 in your circuit design.

(For reference only)