0Capacity: 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN
0A tapped hole cut in the center, can be used for both tension & compression measurement
0Suitable for assembling into press machine and compression & tension testing machine due to its low-profile body
0A cable with a connector. Convenient for exchange.
| Model | UCPI- 1KN |
UCPI- 2KN |
UCPI- 5KN |
UCPI- 10KN |
UCPI- 20KN |
UCPI- 50KN |
|---|---|---|---|---|---|---|
| Rated capacity |
1 kN | 2 kN | 5 kN | 10 kN | 20 kN | 50 kN |
| Rated output | Approx. 2 mV/V | |||||
| Safe overload | 150% R.C. | |||||
| Zero balance | ±10% R.O. | |||||
| Non-linearity | 0.1% or less R.O. | 0.15% or less R.O. |
||||
| Hysteresis | 0.1% or less R.O. | 0.15% or less R.O. |
||||
| Repeatability | 0.1% or less R.O. | |||||
| Compensated temperature range |
10 to 60 | |||||
| Safe temperature range | 20 to 70 | |||||
| Temperature effect on zero | 0.1% R.O./10 or below | |||||
| Temperature effect on span | 0.1% R.O./10 or below | |||||
| Input resistance |
Approx. 1000 Ω | |||||
| Output resistance |
Approx. 1000 Ω | |||||
| Recommended excitation voltage |
10 V | |||||
| Maximum excitation voltage | 15 V | |||||
| Insulation resistance |
1000 MΩ or more | |||||
| Cable | φ5 6 conductor flexible cable 3 m Cable end: 7 wires |
|||||
| Load cell material |
Stainless steel | |||||
| Deflection at rated |
0.05 mm | 0.06 mm |
0.04 mm |
0.05 mm |
0.06 mm |
|
| Natural frequency |
5 kHz | 7 kHz | 10 kHz | 13 kHz | ||
| Weight | 350 g | 410 g | 630 g | |||
| RoHS directives |
2011/65/EU (EU)2015/863 | |||||
With the mounting flange, it is possible to mount UCPI easily to a press machine manufactured by THK.
Malaysia
