FLUKE 289 TRUE RMS INDUSTRIAL DATA LOGGING MULTIMETER WITH TRENDCAPTURE: Top Choice in Selangor, Malaysia JLL Electrical Sdn Bhd

Description

Fluke 289 True-rms Industrial Logging Multimeter with TrendCapture

The Fluke 289 is a high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime.
Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo Kit

Equipped with powerful functionality

TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
Selectable ac filter (Smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
Large 50,000 count, 1/4 VGA dot matrix display with white backlight
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before pc download is necessary
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
''i'' button. On board help screens for measurement functions. Unsure about a function-go to that function and press the ''i'' button.
Real time clock for automatic time stamping of saved readings
Relative mode to remove test lead resistance from low ohms or capacitance measurements
True-rms ac voltage and current for accurate measurements on non linear signals
Measure up to 10 A (20 A for 30 seconds)
100 mF capacitance range
Peak capture to record transients as fast as 250 µs
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
Optically isolated communication port for transferring data to pc (usb cable and software optional)
Limited lifetime warranty

Fluke 289 Specifications

DC Volts
Range/Resolution	50.000 to 500.00 mV 5.0000 to 50.000 V 500.00 to 1000.0 V
Basic Accuracy	0.025%
AC Volts
Range/Resolution	50.000 to 500.00 mV 5.0000 to 50.000 V 500.00 to 1000.0 V
Basic Accuracy	0.4% (True RMS)
DC Current
Range/Resolution	500.00 to 5000.0 µA 50.000 to 400.00 mA 5.0000 to 10.000 A
Basic Accuracy	0.05%
AC Current
Range/Resolution	500.00 to 5000.0 µA 50.000 to 400.00 mA 5.0000 to 10.000 A
Basic Accuracy	0.6% (True RMS)
Temperature (Excluding Probe)
Range/Resolution	328 to 2462°F (-200 to 1350°C)
Basic Accuracy	1.0%
Resistance
Range/Resolution	50.000 to 500.00 Ω 5.0000 to 50.000 kΩ 500.00 kΩ to 5.0000 MΩ 50.00 to 500.0 MΩ
Basic Accuracy	0.05%
Capacitance
Range/Resolution	1.000 to 10.00 nF 100.0 nF to 1.000 µF 10.00 to 100.0 µF 1000 µF to 100 mF
Basic Accuracy	1.0%
Frequency
Range/Resolution	99.999 to 999.99 Hz 9.9999 to 999.99 kHz
Basic Accuracy	0.005%
General Specifications
Maximum Voltage Between any Terminal and Earth Ground	1000 V
Battery Type	6 x AA Alkaline batteries, NEDA 15A IECLR6
Battery Life	100 hours minimum, 200 hours in logging mode
Operating Temperature	-4 to 131°F (-20 to 55°C)
Storage Temperature	-40 to 140°F (-40 to 60°C)
Relative Humidity	0 to 90% (32 to 98.6°F [0 to 37°C]) 0 to 65% (98.6 to 113°F [37 to 45°C]) 0 to 45% (113 to 131°F [45 to 55°C])
Electromagnetic Compatibility	EMC EN61326–1
Vibration	Random vibration per MIL-PRF-28800F Class 2
Shock	3.3 (1 m) drop per IEC/EN 61010–1 3rd Edition
Dimensions	8.75 x 4.03 x 2.38'' (222 x 102 x 60 mm)
Weight	1.92 lbs (870.9 g)

EX STOCK SUBJECT TO PRIOR SALES OR INDENT (4-6 WEEKS)!

For more information, please kindly send us an enquiry.

np_code{type:tag_slider,id:112096,col:5}

More detail about JLL Electrical Sdn Bhd