| Model |
MWER-42000Y |
| Inner chamber sizeW×H×D(mm) |
Non-standard |
| Exterior chamber sizeW×H×D(mm) |
| Temperature range |
0℃；-20℃；-40℃；-60℃，-70℃～+70℃（+80℃） |
| Humidity range |
30% RH～95%RH |
| Temp.Humi fluctuation |
±0.3℃；±0.5%RH |
| Temp.Humi uniformity |
±3℃；±5%RH |
| Indication Resolution |
Temperature:0.01 humidity:0.1%RH |
| Heat-up and Cool-down time |
Heat-up:2℃/min(Average),cool-down time 1℃/min(Average) |
| Air circulation system |
Centrifugal fan air circulation system |
| Heating system |
SUS＃Stainless steel high-speed heater |
| Humidification system |
Electrothermal steam humidification |
| Refrigeration system |
Compressor + Finned evaporator + Air(Water) cooled condenser |
| Dehumidifying system |
dew point dehumidification method |
| Controlling system |
Touch screen controller+SSR+PID |
| Exterior chamber material |
Cold-rolled plate + Powder coating |
| Interior chamber material |
SUS＃304 Stainless steel |
| Insulation material |
PU +fibergalss wool |
| components |
Vacuum glass observation window |
| Test hole (50mm) |
| Control status indicator |
| Interior light |
| Overheat protection circuit breaker |
| Safety protection device |
Humidification system overheat protection |
| Compressor overload protection |
| Control system overload protection |
| Overload indicator |
| Phase sequence protection |
| Water shortage protection |
| High voltage and low voltage protection |
| Over-temperature protection |
| Water supply delay protection |
| Fan overcurrent protection |
| Power supply |
AC 3Ψ380V 60/50Hz Power supply can be customized |
| Customization service |
Non-standard or special requirements are all welcome |
Malaysia
