Standard Programmable T&H Chamber: 马来西亚的首选 Obsnap Instruments Sdn Bhd

详情

Model: MTH-080, MTH-150, MTH-225, MTH-408, MTH-800, MTH-1000

Main Parameters:

Temperature: 0℃/-20℃/-40℃/-80℃ ~ +150℃
Humidity: 20%～98% RH (lower humidity is optional)
Heat-up speed: average 3℃/min
Cool-down speed: average 1℃/min

Description of Standard Programmable Temperature Humidity Chamber

Temperature chambers are used for material performance tests under different environments, such as heat, cold, moisture, heat and moisture. Meridian environmental system is designed to provide a precise and various environments for testing in correspondence with the IEC60068 standard, production testing, and laboratory testing.

Mainly applied to electronics, electrical appliances, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace, and other industries.

Model No.	MTH-080	MTH-150	MTH-225		MTH-408	MTH-800	MTH-1000
Inner chamber size(cm)	40×50×40	50×60×50	60×75×50		80×85×60	100×100×80	100×100×100
Exterior chamber size (cm)	60x172x120	70x174x130	70x172x181		100x182x197	120x197x197	120x197x217
Temperature range				-70℃，-60℃, -40℃, -20℃, 0℃~150℃，other temperature can be customized
Humidity range				20%RH～98%RH(10%RH～98%RH 5%RH～98%RH)can be customized)
Temp.humi.fluctuation				±0.3℃；±0.5%RH
Temp.humi.uniformity				±2℃；±3%RH (empty load, 30 minutes after stablization)
Temp.humi.resolution				0.01℃；0.1%RH
Heating&cooling time ℃/min				Heating rate 3℃/min, cooling rate 1℃/min(average rate, non-linear change)
Exterior chamber material				Cold-rolled plate + Powder coating
Interior chamber material				SUS#304 Stainless steel
Insulation material				PU
Circulation system				Centrifugal fan air circulation system
Heating system				SUS# Stainless steel high-speed heater
Humidification system				Electrothermal steam humidification
Dehumidifying				ADP critical dew point cooling / dehumidifying method
Refrigeration system				Compressor + Finned evaporator + Air(Water) cooled condenser
Controlling system				Touch screen controller+SSR+PID
Other components				Vacuum glass observation window
				Test hole (50mm)
				Control status indicator
				Interior light
				Loading shelf (2pcs, height adjustable)
Safety protection device				Overheat protection circuit breaker
				Humidification system overheat protection
				Compressor overload protection
				Control system overload protection
				Overload indicator
				Phase sequence protection
				Water shortage protection
				High voltage and low voltage protection
				Over-temperature protection
				Water supply delay protection
				Fan overcurrent protection
Power supply				AC 1Ψ 220V; 3Ψ 380V 60/50Hz
Customization service				Non-standard or special requirements can be customized.

更多 Obsnap Instruments Sdn Bhd 相关资料