JGND-50 Digital Display Material Torsion Testing Machine: 马来西亚的首选 JNG Industry Sdn Bhd

详情

Introduction

The electronic torsion testing machine is composed of a loading system, a transmission system, a data acquisition, processing, control, and display system, and is suitable for testing the mechanical properties of various torsion elastic elements, components, bolts, etc. The machine adopts a horizontal structure, an embedded high-performance single-chip MCU controller, a liquid crystal display, a full Chinese operation and display interface, and the displayed information is intuitive and easy to read. The multi-button operation and the Chinese display interface make your operation simpler. You can complete the system parameter setting by operating in the order of the habitual prompt interface. It adopts AC servo motors and precision reducer transmissions, and has the characteristics of uniform loading, stability, no impact, and accurate data acquisition and control.The whole machine uses the fully digital Testsmart data acquisition and processing system and the liquid crystal display system to perform multi-point tests on the torsion angle of the specimen.

Specifications:

Parameters	Details
Maximum Torque (N.m)	50
Effective Side Torque Range (N.m)	1%-100%
Relative Error of Torque Indication	±1.0%
Torque Resolution	1/±300000
Torsion Angle Measurement Range	0~1000°
Relative Error Of Torsion Angle Indication	±1.0%
Test Speed	0.05-360°/min
Relative Error Of Speed Indication	±1.0%
Clamping Distance (mm)	0~450 (negotiable)
Power Supply	AC 220V±10%, 50Hz
Test Machine Level	Level 1
Dimension (mm)	1050550690mm
Weight (kg)	Approximate 120kg
Working Environment Requirements of the Test Bench
At room temperature 100°C~350°C, relative humidity £80%
On a stable foundation or workbench
In an environment without vibration and corrosive media
The fluctuation range of the power supply voltage should not exceed ±10% of the rated voltage.