| Isokinetic: |
|
| Method 2 |
Determination of stack gas velocity and volumetric flow rate (Type S Pitot tube). |
| Method 2C |
Determination of gas velocity and volumetric flow rate in small stacks or ducts (Standard Pitot tube). |
| Method 2D |
Measurement of gas volume flow rates in small pipes and ducts. |
| Method 2F |
Determination of stack gas velocity and volumetric flow rate with three dimensional probes. |
| Method 2G |
Determination of stack gas velocity and volumetric flow rate with two dimensional probes. |
| Method 2H |
Determination of stack gas velocity taking into account velocity decay near the stack wall. |
| Method 3 |
Gas Analysis for the Determination of Dry Molecular Weight. |
| Method 4 |
Determination of moisture content in stack gases. |
| Method 5 |
Determination of particulate matter emissions from stationary sources. |
| Method 5G |
Determination of particulate matter emissions from wood heaters. (Dilution tunnel sampling location.) |
| Method 5I |
Determination of low level particulate matter emissions from stationary sources. |
| Method 7C |
Determination of nitrogen oxide emissions from stationary sources (alkaline permanganate/colorimetric method). |
| Method 7D |
Determination of nitrogen oxide emissions from stationary sources (alkaline-permanganate/ion chromatographic method). |
| Conditional Test Method CTM-13 |
Determination of Sulfuric Acid Vapor or Mist and Sulfur Dioxide Emissions from Kraft Recovery Furnaces |
| Method 8 |
Determination of sulfuric acid and sulfur dioxide emissions from stationary sources. |
| Method 11 |
Determination of hydrogen sulfide content of fuel gas streams in petroleum refineries. |
| Method 17 |
Determination of particulate matter emissions from stationary sources. |
| Method 23 |
Determination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from stationary sources. |
| Compact Method 23 |
Determination of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from stationary sources. |
| Method 26A |
Determination of hydrogen halide and halogen emissions from stationary sources isokinetic method. |
| Method 27 |
Determination of vapor tightness of gasoline delivery tank using pressure vacuum test. |
| Method 29 |
Determination of metals emissions from stationary sources. |
| Ontario Hydro - Method ASTM D6784-02 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method). |
| Method 201 |
Determination of pm10 emissions (exhaust gas recycle procedure). |
| Method 201A |
Determination of pm10 and pm2.5 emissions from stationary sources (constant sampling rate procedure). |
| Method 202 |
Dry impinger method for determining condensable particulate emissions from stationary sources. |
| Method 0061 |
Determination of hexavalent chromium emissions from stationary sources. |
| Flow and Temperature: |
|
| Method 0040 |
Sampling of principal organic hazardous constituents from combustion sources using Tedlar® bags. |
| Method 7 |
Determination of nitrogen oxide emissions from stationary sources. |
| Method 6 |
Determination of sulfur dioxide emissions from stationary sources. |
| Method 26 |
Determination of Hydrogen Halide and Halogen |
| Method 0031 |
Determination of Volatile Organic Compounds (SMVOC) |
| Method 18 |
Determination of Gaseous Organic Compound Emissions by Gas |
| Mercury: |
|
| Method 30B |
Determination of mercury from coal-fired combustion sources using carbon sorbent traps. |
| Method PS-12B |
Specifications and test procedures for total vapor phase mercury continuous emission monitoring systems in stationary sources. |
| Gas Sampling Methods: |
|
| Method 25A |
Determination of Total Gaseous Organic Concentration Using a Flame Ionization Analyzer |
Malaysia
