In the vibrant food and beverage industry of Kuala Lumpur and Selangor, kitchen exhaust systems are the highest fire-risk areas in any commercial building. Kitchen Fire Ducting refers to specialized, heavy-duty exhaust networks designed to contain high-temperature "flash fires" caused by ignited grease and oil. EKG M&E Sdn Bhd provides high-performance, fire-rated kitchen ducting that strictly complies with NFPA 96, BOMBA standards, and the Uniform Building By-Laws (UBBL).
Standard galvanized ductwork is not suitable for kitchens because grease can leak through joints, and the thin metal will melt rapidly during a grease fire.
To prevent flammable grease from leaking into ceiling voids, our kitchen fire ducts are constructed using 1.2mm to 1.6mm heavy-gauge steel or stainless steel.
Continuous Welded Joints: Unlike standard HVAC ducts that use folds or gaskets, kitchen fire ducts must be continuously welded (TIG/MIG) to be liquid-tight and fire-tight.
Fire-Rated Integrity: The assembly must maintain its integrity for at least 2 hours (FRL 120/120/120). This ensures that a fire inside the duct stays inside the duct, preventing it from spreading to the rest of the building.
Fire-Wrap Encapsulation: We apply certified high-density mineral wool or ceramic fiber wraps. This provides a thermal barrier that prevents the outside of the duct from becoming hot enough to ignite nearby combustible materials.
Zero Clearance Solutions: In crowded KL shop-lots or mall ceilings, we utilize specialized high-performance wraps that allow the duct to be placed closer to structural elements while still maintaining fire safety.
As a BOMBA-Compliant M&E Specialist, EKG ensures your kitchen infrastructure supports long-term efficiency:
TNB Energy Efficiency (The Airtight Advantage):
Because kitchen fire ducts are fully welded and airtight, they eliminate static pressure loss. This high level of seal integrity allows your Variable Frequency Drive (VFD) to maintain optimal smoke and heat extraction at lower frequencies (Hz). This directly results in a lower monthly TNB electricity bill for your restaurant or central kitchen.
EECA 2024 & Odor Control:
Under the Energy Efficiency and Conservation Act (EECA) 2024, efficient mechanical systems are mandatory. Our liquid-tight seals ensure that cooking odors and heat are transported directly to the discharge point without escaping into public or office areas, protecting your building's air quality.
Reduced Insurance Risk:
A certified, fire-rated kitchen exhaust system significantly reduces the risk of total property loss. Many insurance providers in Malaysia require proof of compliant fire ducting and regular maintenance (grease cleaning) to maintain coverage.
| Feature | Standard Commercial HVAC | EKG Kitchen Fire Ducting |
| Material | 0.5mm – 0.8mm GI | 1.2mm – 1.6mm Welded Steel/SS |
| Joint Type | Slip / Gasket | Continuous Liquid-Tight Weld |
| Fire Rating | None | 2-Hour (FRL 120/120/120) |
| BOMBA Required | No | Mandatory (NFPA 96 / UBBL) |
| Primary Risk | Dust / Humidity | Ignited Grease / Oil |
Total 3D BIM Coordination: We utilize 3D modeling to route heavy kitchen ducts through complex ceiling spaces, ensuring they don't clash with fire sprinklers or structural beams while maintaining necessary maintenance access.
Turnkey BOMBA Submission: We assist in the preparation of technical drawings and material data sheets required for Fire Certificate (FC) inspections and annual renewals.
Mandatory Maintenance Access: We install certified fire-rated access panels at every change of direction (as per NFPA 96), allowing for the regular grease cleaning required to prevent fire buildup.
Is your kitchen's exhaust system a fire hazard or a certified safety asset? Contact EKG M&E Sdn Bhd today for a professional kitchen fire ducting audit and technical proposal.
More detail about EKG M & E SDN BHD
Malaysia
