Streamline your studio or stage setup with the EMX Professional Dual Patch Cable. This 1.5-meter cable features two independent 6.35mm (1/4") Mono plugs on one end and two RCA Male plugs on the other. It is the essential bridge for devices that utilize separate Left and Right jacks—such as professional synthesizers, DJ controllers, and audio interfaces—allowing them to connect directly to the RCA inputs of mixers, amplifiers, and home theater systems.
Discrete Stereo Routing: Features two independent internal cables, ensuring 100% channel isolation for a perfect stereo image.
Industrial-Grade Shielding: Built with high-density spiral shielding to block out hum and radio frequency interference (RFI), keeping your audio signal pure.
Precision 1.5M Length: The ideal "Patch" length for connecting gear on a desktop or rack without excess cable slack.
Color-Coded Identification: Both the 6.35mm and RCA ends are color-coded (Red/White) for foolproof Left and Right channel matching.
Professional Keyboards/Synths: Connect the separate "L/Mono" and "R" 1/4" outputs of your keyboard to an RCA amplifier.
DJ Controllers: The standard link between a DJ controller's Master Out (6.35mm) and a club or home sound system's RCA input.
Audio Interfaces: Bridge the 1/4" Line Outs of your studio interface to a pair of active desktop monitors that use RCA.
Mixer Patching: Perfect for routing "Sub-Group" or "Aux" sends from a mixing board into an RCA-based recording device.
Dual 6.35mm (1/4") TS Mono: Two rugged, independent mono plugs for high-integrity professional connections.
Dual RCA Male: Standard Red/White color-coded plugs with high-conductivity nickel plating.
Durable "Zip-Cord" Design: The dual cables are bonded together but can be easily "zipped" apart for cases where the jacks on your equipment are far apart.
Molded Strain Relief: Reinforced junctions at all four connectors prevent internal wire fatigue from frequent plugging and unplugging.
Product Type: Dual 6.35mm Mono to Dual RCA Male
Signals: 2-Channel Discrete Stereo (Dual Mono to Dual Mono)
Channel Coding: White (Left / Tip), Red (Right / Tip)
Length: 1.5/ 3 Meter
Included: 1x Dual 6.35mm to Dual RCA Patch Cable
1. Is this the same as a "Y-Splitter"? No. A Y-splitter takes one plug and splits it into two. This is a dual-path cable meant for gear that has two separate output jacks (Left and Right).
2. Can I use this for balanced signals? This cable is designed for Unbalanced Mono (TS) signals. If your equipment uses Balanced (TRS) ports, this cable will still work, but the signal will be transmitted as unbalanced.
3. My equipment jacks are far apart, will this reach? Yes! The "zip-cord" design allows you to peel the two cables apart as much as you need, so you can reach jacks located on opposite ends of a large synthesizer or mixer.
More detail about EMX Electronic Trading Sdn Bhd
Malaysia
