74LS31: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	V_CC	4.75	5.0	5.25	V
Input Low Voltage	V_IL	0.0	-	0.8	V
Input High Voltage	V_IH	2.0	-	5.25	V
Output Low Voltage	V_OL	0.0	0.4	0.5	V
Output High Voltage	V_OH	2.7	3.4	5.25	V
Input Current (Low)	I_IL	-1.0	-	-0.4	mA
Input Current (High)	I_IH	-0.02	-	0.4	mA
Output Current (Low)	I_OL	-8.0	-	-16.0	mA
Output Current (High)	I_OH	0.4	-	8.0	mA
Propagation Delay Time	t_pd	-	9.0	22.0	ns
Power Dissipation	P_D	-	-	100.0	mW

Power Supply:
- Connect V_CC to +5V and GND to 0V.
- Ensure the supply voltage is within the specified range (4.75V to 5.25V).
Input Connections:
- Apply input signals to the input pins (A1, A2, B1, B2, C1, C2, D1, D2).
- Ensure input voltages are within the valid range: V_IL (0.0V to 0.8V) for low logic level and V_IH (2.0V to 5.25V) for high logic level.
Output Connections:
- The outputs (Y1, Y2, Y3, Y4) will be active low when the corresponding inputs are not equal.
- Ensure the output current does not exceed the maximum ratings: I_OL (up to -16.0mA) and I_OH (up to 8.0mA).
Propagation Delay:
- The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes. It typically ranges from 9.0ns to 22.0ns.
Power Dissipation:
- The maximum power dissipation for the device is 100.0mW. Ensure proper heat dissipation if operating near this limit.
Handling:
- Handle the IC with care to avoid damage from static electricity.
- Store in an anti-static bag when not in use.
Testing:
- Before integrating the 74LS31 into your circuit, test it on a breadboard to ensure it functions correctly.
- Use a multimeter to verify input and output voltages and currents.
Schematic Integration:
- Refer to the datasheet for the pinout diagram and integrate the 74LS31 into your circuit schematic accordingly.

(For reference only)