・TC80-CCL is a compact torque converter.
・Compatible with rotary encoder option (UTM(R)/ UTM(R)) too!
・UTM III / UTF digital output can be read, and make noise resistance tester.
・Torque data (hold value) is stored up to 100, and data can be read.
Light weight & compact body for 35mm DIN rail mount
With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.
Analog sectionDisplay sectionExternal signalInterfaceGeneral performanceAttachments
| Analog section | |
| Signal input range |
-10 to +10V (UTM/UTF Option) Input impedance: 1MΩ or more -5 to +5V (UTM/UTMV) Input impedance: 1MΩ or more |
|---|---|
| Accuracy |
Non-linearity within 0.02%FS±1digit Zero drift within 0.2mV/ RTI Gain driftwithin 0.01%/ |
|
Digital low-pass filter |
PASS,3 to 1kHz |
| A/D converter |
Rate 16000times/sec Resolution24bit (binary)Approx. 1/30000 against 10V |
|
Analog monitor output (Test point / UTF Option) |
Transmitted input voltage |
| Pulse input for rotation speed (open collector input/UTM/UTMV/UTM) | |
| Max. rotation speed | Depend on UTM/ UTMV/ UTM |
| Min. rotation speed |
Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr) Selectable from 60, 40, 20, 12, 8rpm (when pulse rate is 1 ppr) |
| Min. pulse width | 50μs |
|
Circuit configuration |
No-voltage contact input (minus common) Connectable to open collector (Ic=Approx. 10mA) |
| Rotation speed input for low speed(Pulse input, open collector) | |
| Maximum input frequency | Approx. 1000rpm |
| Minimum input frequency | 0.1rpm |
| Minimum detection pulse width | 5μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (IcApprox. 10mA) |
|
Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF option) |
|
| Max. frequency | Depend on UTF |
|
Circuit configuration |
Line driver (RS-422A compliant) |
| Encoder input(Pulse input) | UTM/UTM Compatible with rotary encoder option |
|---|
| Display section | |
| Display unit |
Character height 8mm Numerical display by 7-segment green LED |
|---|---|
| Display content |
Switchable numeric display (torque, rotation speed, angle) |
| Display frequency | Selectable from 1, 3 , 6, 13, 25 times/sec. |
| Status display | RUNSDRDERR |
| External signal | |
| Output signal (2) |
Selectable/ configurable Transistor’s open collector output Vceo=30V Ic=50mA |
|---|---|
| Input signal (1) |
Selectable/ configurable Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.) Input is ON when shorted to COM terminal |
| Interface | |
| USB | USB Interface |
|---|---|
| CCL | CC-Link Interface |
| 485 | RS-485 Interface |
| 422 | RS-422A Interface (UTF Option) |
| General performance | |
|
Power supply voltage |
DC24V ±15% |
|---|---|
| Power consumption | 6W typ. |
|
Operating conditions |
Temperature: Operating temperature range: -10 to +50, Storage temperature range: -20 to +85 Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
| Weight | Approx. 230g |
| CE marking certification | EMC directives EN61326-1 |
| Attachments | |
| Quick manual | 2 |
|---|---|
| CC-Link connector | 1 |
| Mini driver | 1 |
| Various I/O connector | 2 |
| Ferrite core | 1 |
|
Product catalogue(PDF)
|
TC80 catalogue(862 KB) | |
|---|---|---|
Malaysia
