Ensure your high-voltage electronics run at peak efficiency with our 24V 1A AC-DC Adapter. Delivering a consistent 24W output, this power supply is specifically engineered for devices requiring the 24-Volt standard. It features the industry-standard 5.5mm x 2.1mm DC barrel connector, making it a reliable and easy-to-use replacement for lost or damaged power units.
LED Lighting: Ideal for driving 24V LED strips, light boxes, and architectural accent lighting.
Industrial Electronics: Perfect for small PLCs, solenoid valves, and specialized industrial controllers requiring 24V.
Networking & PoE: Compatible with certain 24V Passive PoE injectors and wireless access points.
Audio & Musical Gear: Suitable for select portable amplifiers and specialized musical pedals designed for 24V input.
1A (1000mA) Constant Current: Provides a steady 1 Amp of regulated power, ensuring your devices operate without performance lag or voltage drops.
Standard 2.1mm Connector: Features a 5.5mm (outer diameter) x 2.1mm (inner diameter) tip for a snug, secure fit into the most common 24V ports.
Integrated Safety Protections: Built-in safeguards against over-voltage, short-circuits, and over-current to protect your sensitive equipment.
Compact & Reliable Design: A sleek, space-saving wall-plug design that doesn't block adjacent outlets while providing a full 24W output.
Regulated Output: Maintains a constant 24V signal, which is critical for protecting the delicate internal circuits of industrial and networking hardware.
Low Signal Noise: Advanced internal filtering minimizes electromagnetic interference (EMI), ensuring clean power for clear data and audio signals.
Durable Build Quality: Constructed with a high-impact resistant shell and reinforced cable strain relief for long-term daily use.
Input: 100V-240V AC ~ 50/60Hz (Global Compatibility).
Output: 24V DC 1000mA (1A / 24W Max).
Connector: 5.5mm (OD) x 2.1mm (ID).
Plug Type: Standard 3-pin (Type G) for Malaysia, Singapore, and the UK.
Can I use this for a 24V device that only needs 500mA (0.5A)?
Yes. Amperage is a maximum rating. Your device will only "pull" the 500mA it needs, allowing the 1A adapter to run cooler and last longer.
Will this fit a 2.5mm pin?
This adapter is specifically for 2.1mm pins. If your device has a 2.5mm pin, the connector will not fit. Please check your device's port size before ordering.
Is it "Center Positive"?
Yes, this adapter follows the industry-standard center-positive (+) polarity. Most 24V electronics use this configuration.
