Prevent costly hardware repairs with our DB25 Male to Female Gender Changer. Known in the industry as a "Port Saver," this compact adapter acts as a protective buffer between your device's built-in port and the cables you plug and unplug daily. Instead of wearing out the delicate solder joints on your motherboard or industrial controller, you wear out this sacrificial adapter!
Industrial Port Protection: Ideal for CNC machines, PLCs, and heavy machinery where serial/parallel cables are frequently swapped.
Professional Audio (D-Sub 25): Protect the DB25 ports on high-end mixing consoles and audio interfaces (Tascam/Mackie standards).
Legacy Computing: Use as a "mini-extension" for Parallel (LPT) ports to provide better clearance in tight server racks.
Testing & Development: Perfect for labs and test benches where 25-pin interfaces are under constant use.
Full 25-Pin Passthrough: Wired Straight-Through (1:1), ensuring all data signals, grounding, and control handshakes pass through without interference.
Ultra-Low Profile Design: The "Mini" footprint ensures minimal leverage is applied to the host port, reducing the risk of mechanical snap.
360-Degree Shielding: Encased in a rugged, nickel-plated steel shell to block EMI/RFI noise and maintain high-fidelity data/audio signals.
Secure Hardware Locking: Features threaded nuts on one side and matching thumbscrews on the other for a vibration-proof, locked-in connection.
Sacrificial Protection: It is much cheaper to replace a port saver than it is to de-solder and repair a 25-pin port on a mainboard.
Zero Signal Loss: Precision-engineered internal pins ensure perfect conductivity for both high-speed parallel data and balanced analog audio.
Industrial Grade: Built for heavy-duty use in factories, studios, and IT rooms.
Connector A: DB25 Male (25 Pins)
Connector B: DB25 Female (25 Holes)
Wiring: Straight-Through (Pin 1 to Pin 1)
Does this change a Parallel port to a Serial port?
No. This is a passive adapter that maintains the existing signal. It simply changes the "reach" of the port while protecting the pins.
Can I use this for my 8-channel audio snake?
Yes. This is the correct 25-pin layout used for Tascam/Digidesign analog audio standards. It’s a great way to protect the ports on your audio interface.
Does it come with the locking screws?
Yes. It features integrated screws and hex nuts so you can lock it to your device and then lock your cable to the adapter.
