HIGH PERFORMANCE POLYSULPHIDE JOINT SEALANT
Description
Corkjoint J-Seal PS-100 is a high performance polysulphide joint sealant for use in a variety of applications. It has excellent adhesion to most substrates and can be used in immersed conditions.
J-Seal PS-100 is available in both gun grade and pouring grade:
Gun grade - Suitable for vertical or horizontal applications and is available in a ready to mix, two and a half litre tin containing the base and curing agent in correct proportions.
Pouring grade - Suitable for horizontal applications and is available in a four litre pack with base and curing agent in separate tins.
Uses
High movement joints & construction joints
General purpose joint sealing
Highway & Roads
Water retaining and excluding structures
Subways & MRT platforms
Warehouses & industrial factory floors
Advantages
Meets SCAQMD Rule 1168 & LEED VOC Limits
Formaldehyde free
Can be used in immersed conditions
Durable resilient seal with excellent recovery characteristics
High early movement accommodation
Excellent application characteristics
Can be used in contact with potable water
Available in gun and pouring grades
Application
Limitation
Overhead joints
Movement joints having a Movement Accomodation Factor (MAF) of > 25%
Over painting with enamel or rigid paints (paint compatibility with sealant shall be checked prior to painting)
Applied in joints wider than 50mm
Applied in joints less than 5mm in width and depth
Use for glazing applications
High and/or sharp point loads
Do not apply in rain or wet conditions, or at temperatures below 5ºC
Do not part mix
Colour
Grey
Packaging
Gun grade: 2.5 L / set
Pouring grade: 4 L / set or 18 L / set
Malaysia
