FLEXIBLE CEMENTITIOUS COATING, USED FOR WATERPROOFING WATER RETAINING STRUCTURES AND WATER EXCLUDING STRUCTURES
Description
Nitocote CM210 two-component polymer modified cementitious coating is supplied in pre-packaged form.
The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using either brush, trowel or spray. Roller application may also be used, however finishing the surface with a trowel is recommended for best results.
Nitocote CM210, available in grey and white, cures to form an elastomeric impermeable membrane.
Uses
Nitocote CM210 provides a cementitious, elastomeric waterproof coating with inherent crack bridging ability. Typical applications include:
Potable water retaining structures.
Swimming pools.
Potable water excluding structures.
Internal basement waterproofing.
Drainage culverts.
Wet areas: Kitchens, bathrooms, shower rooms
Foundations in contact with ground water under saline conditions.
Vapour barrier.
Characteristics & Advantages
No primer required
Suitable for light foot traffic prior to installation of protective finishes
Withstands high positive and negative hydrostatic pressures
Excellent bond to concrete and masonry
Long working time for ease of application
Easy application by brush, roller, trowel or spray
Can be applied to green or damp concrete
Effective barrier to sulfates and chlorides
Packaging
Part A (Powder): 18 kg / bag
Part B (Liquid): 5 kg /pail
Malaysia
