TLP719
TLP719

 

TLP719

Utsource Holding Company Limited flag
Kategori: Tersedia (Jml:9999999)
Untuk informasi lebih lanjut, kunjungi situs resmi kami di utsource.us
Kunjungi Situs Resmi Hubungi Kami
Deskripsi

BUY TLP719 https://www.utsource.net/itm/p/1553653.html
Optocoupler - IC Output, 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 11-5J1, SDIP-6

Parameter Symbol Min Typical Max Unit Conditions/Notes
Forward Voltage VF - 1.2 - V IF = 20 mA
Peak Forward Current IF(P) - - 50 mA t < 1 ms
Continuous Forward Current IF - - 20 mA ta = 25°C
Reverse Voltage VR - - 5 V IF = 0 mA
Output High Voltage VOH 3.8 - 5.0 V IO = -4 mA, VCC = 5 V
Output Low Voltage VOL - 0.4 0.8 V IO = 16 mA, VCC = 5 V
Propagation Delay Time tPLH 10 20 30 ns IF = 20 mA, VCC = 5 V, RL = 500 Ω
Propagation Delay Time tPHL 10 20 30 ns IF = 20 mA, VCC = 5 V, RL = 500 Ω
Storage Temperature TSTG -55 - 125 °C
Operating Temperature TA -40 - 85 °C

Instructions for Use:

  1. Forward Current (IF):

    • Ensure the forward current does not exceed 20 mA continuously to avoid damage.
    • For short pulses, the peak forward current can be up to 50 mA for durations less than 1 ms.

  2. Reverse Voltage (VR):

    • The device should not be subjected to reverse voltages greater than 5 V to prevent breakdown.

  3. Output Voltage Levels:

    • When the output is high, the voltage should be between 3.8 V and 5.0 V with a load current of -4 mA.
    • When the output is low, the voltage should be between 0.4 V and 0.8 V with a load current of 16 mA.

  4. Propagation Delay:

    • The propagation delay times (tPLH and tPHL) should be considered when designing circuits to ensure proper timing.

  5. Temperature Considerations:

    • The storage temperature range is from -55°C to 125°C.
    • The operating temperature range is from -40°C to 85°C.

  6. Handling:

    • Handle the device with care to avoid static discharge, which can damage the internal components.
    • Follow proper soldering techniques to avoid thermal stress during assembly.

  7. Mounting:

    • Ensure the device is mounted on a suitable PCB with adequate heat dissipation if necessary.
    • Use appropriate mechanical supports to prevent physical stress on the leads.

By adhering to these parameters and instructions, you can ensure reliable operation of the TLP719 optocoupler in your application.

(For reference only)

Lihat detail lebih lanjut tentang Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Hubungi Kami flag