XC6SLX150-3FGG676C

XC6SLX150-3FGG676C

Kategori: Elec-component Tersedia (Jml:9999999)
Untuk informasi lebih lanjut, kunjungi situs resmi kami di utsource.us

Deskripsi

BUY XC6SLX150-3FGG676C https://www.utsource.net/itm/p/6369300.html
IC FPGA 498 I/O 676FBGA

Parameter Description
Part Number XC6SLX150-3FGG676C
Family Spartan-6
Type FPGA (Field Programmable Gate Array)
Logic Cells 150,200
RAM (Block) 2,880 KB
Multipliers (DSP48) 192
I/O Banks 16
Configuration Flash No internal flash; requires external configuration device
Package FGG676 (Fine Line Ball Grid Array)
Speed Grade -3 (indicating performance level)
Operating Voltage 1.2V core, 1.5V or 3.3V I/O
Temperature Range Commercial: 0°C to 70°C, Industrial: -40°C to 100°C
Clock Resources 8 DCM (Digital Clock Managers), 4 PLL (Phase-Locked Loops)
Transceivers None
Special Features SelectIO technology, PowerPC 405 hard processor block (optional)

Instructions for XC6SLX150-3FGG676C

  1. Power Supply Requirements

    • Ensure the core voltage is set to 1.2V.
    • Set the I/O voltage to either 1.5V or 3.3V depending on your application requirements.
  2. Configuration

    • Use an external configuration device as this FPGA does not have internal flash memory.
    • Follow the configuration modes and protocols specified in the Spartan-6 Configuration User Guide.
  3. Clock Management

    • Utilize the available DCMs and PLLs for clock generation and management.
    • Refer to the Spartan-6 Libraries Guide for detailed information on clock resource utilization.
  4. Signal Integrity

    • Pay attention to signal integrity guidelines provided in the Spartan-6 SelectIO Resources User Guide.
    • Properly terminate differential pairs and high-speed signals.
  5. Thermal Management

    • Ensure adequate cooling solutions are in place, especially if operating at higher temperatures.
    • Consult the thermal design guidelines for specific recommendations.
  6. Handling and Storage

    • Handle with care to avoid ESD damage.
    • Store in antistatic packaging when not in use.
  7. Design Verification

    • Verify your design using simulation tools like Xilinx ISE or Vivado.
    • Perform thorough testing on the prototype before mass production.

For more detailed information, refer to the official Xilinx documentation for the Spartan-6 family.

(For reference only)

Lihat detail lebih lanjut tentang Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited