TEXAS INSTRUMENTS LM1117MP-1.8/NOPB: Pilihan Terbaik di United States (USA) Utsource Holding Company Limited

Deskripsi

Parameter	Conditions	Min	Typ	Max	Unit
Input Voltage		1.7		15	V
Output Voltage	Fixed		1.8		V
Output Current	Continuous		800		mA
Dropout Voltage	Iout = 100mA		1.2		V
Quiescent Current	Iout = 0mA		5	10	mA
Power Supply Rejection	f = 120Hz		65	80	dB
Operating Junction Temp		-40		125	°C

Input Capacitor:
- It is recommended to use a minimum of 1 μF ceramic capacitor on the input pin to ensure stability.
Output Capacitor:
- A 1 μF ceramic capacitor should be placed between the output and ground pins close to the device. Larger capacitors can be used for better transient response.
PCB Layout:
- Place the input and output capacitors as close as possible to the respective pins.
- Ensure good thermal management by providing adequate copper area or heat sinks if necessary.
Power Supply:
- The input voltage must be at least 1.2V higher than the output voltage to ensure proper regulation.
Operating Temperature:
- Operate within the specified junction temperature range to avoid damage and ensure reliable performance.
Handling:
- This is a lead-free (Pb-Free) package. Follow standard handling procedures for such components to prevent contamination or damage.
Storage:
- Store in a dry, cool environment away from direct sunlight and corrosive substances.

For detailed application notes and further specifications, refer to the official Texas Instruments datasheet for the LM1117MP-1.8/NOPB.

(For reference only)