MC2836: Pilihan Terbaik di United States (USA) Utsource Holding Company Limited

Deskripsi

BUY MC2836 https://www.utsource.net/itm/p/11275155.html
mC2836 1 PAir Common Anode Switching Diodes 50V 100mA/0.1A SOT-23/SC-59 marking A4 highspeed switch

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VCC	4.75	5.0	5.25	V	Operating supply voltage
Operating Temperature	Toper	-40	-	85	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range
Input Frequency Range	fIN	0.1	-	20	MHz	Input frequency range
Output Frequency Range	fOUT	0.1	-	20	MHz	Output frequency range
Phase Noise (1 kHz)	L(f)	-	-125	-	dBc/Hz	Phase noise at 1 kHz offset
Phase Jitter	σφ	-	1.5	-	ps RMS	Phase jitter
Current Consumption	ICC	-	2.5	3.5	mA	Current consumption at VCC = 5V
Output Drive Capability	IOUT	-	15	20	mA	Maximum output current
Power Supply Rejection	PSRR	-	60	-	dB	Power supply rejection ratio
Start-up Time	tSTART	-	500	-	μs	Time to reach stable operation

Power Supply:
- Ensure the supply voltage is within the specified range of 4.75V to 5.25V.
- Use a stable power source to avoid fluctuations that could affect performance.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -65°C to 150°C.
Frequency Settings:
- The input frequency should be within the range of 0.1 MHz to 20 MHz.
- The output frequency should also be within the range of 0.1 MHz to 20 MHz.
Phase Noise and Jitter:
- The phase noise at 1 kHz offset is typically -125 dBc/Hz.
- The phase jitter is typically 1.5 ps RMS.
Current Consumption:
- The typical current consumption is 2.5 mA with a maximum of 3.5 mA at VCC = 5V.
Output Drive:
- The maximum output current is 20 mA, with a typical value of 15 mA.
Power Supply Rejection:
- The power supply rejection ratio (PSRR) is typically 60 dB.
Start-up Time:
- The device will reach stable operation within 500 μs after power is applied.
Layout and PCB Design:
- Use short and wide traces for power and ground connections to minimize inductance.
- Place decoupling capacitors close to the power pins to filter out noise.
Handling and Storage:
- Handle the device with care to avoid static damage.
- Store the device in a dry environment to prevent moisture damage.

(For reference only)