Deskripsi
BUY (5PCS) DIP CERAMIC RESISTOR 5% 20W 2Ω(2R) https://www.utsource.net/itm/p/12604649.html
| Parameter |
Value |
| Package Quantity |
5PCS |
| Package Type |
DIP |
| Material |
Ceramic |
| Tolerance |
5% |
| Power Rating |
20W |
| Resistance |
2Ω (2R) |
Instructions:
- Handling: Handle the resistors with care to avoid damage. Ensure that they are stored in a dry and cool place when not in use.
- Installation: Install the resistors by aligning them properly on the PCB or breadboard. Ensure that the leads are securely soldered or connected.
- Power Consideration: Do not exceed the maximum power rating of 20W to prevent overheating and potential failure.
- Resistance Verification: Before installation, verify the resistance value using a multimeter to ensure it matches the specified 2Ω.
- Soldering: Use a temperature-controlled soldering iron to avoid damaging the ceramic body during soldering.
- Inspection: After installation, inspect the connections for any shorts or poor solder joints.
- Disposal: If replacing, dispose of old resistors responsibly according to local regulations.
(For reference only)
Lihat detail lebih lanjut tentang Utsource Holding Company Limited
