About GLORYSTAR GS-CEL Series
Glorystar GS-Cel Series Feature
| ITEM | GS-4020CEL | GS-6020CEL | GS-6025CEL | GS-8025CEL |
| Working Area (mm) | 4,000*2,000 | 6,000*2,000 | 6,000*2,500 | 8,000*2,500 |
| X Axis Travel Distance (mm) | 2,050 | 2,550 | 2,550 | |
| Y Axis Travel Distance (mm) | 4,050 | 6,050 | 8,020 | |
| Z Axis Travel Distance (mm) | 290 | |||
| X/Y Axis Positioning Accuracy | ≤0.03mm/min | |||
| X/Y Axis Repeat Positioning Accuracy | ≤±0.02mm | |||
| Max. Synthetic Positioning Speed | 100m/min | |||
| Max. Acceleration | 1.4G | |||
| Cutting Kerf Width | 0.1mm-0.5mm (Actual Measured Value Of Plate Thickness 3mm) | |||
| Cutting Surface Roughness | Ra3.2um-Ra25.4um (Actual Measured Value Of Plate Thickness 3mm) | |||
| Min Setting Unit | 0.001mm | |||
| Floor Size (mm) | 12,000*5,000 | 16,150*4,500 | 16,150*5,000 | 21,000*5,000 |
| Main Body Dimsntion (mm) | 10,700*3,500 | 15,150*3,500 | 15,150*4,000 | 19,500*4,000 |
| 2,000 | ||||
| CNC System | FSCUT (Cypcut) | |||
| Screen | 27” LCD | |||
| Transmission Mode | Double Driver System With Pinion & Rack | |||
| Worktable Max. Weight Capacity (T) | 2.5 | 3.7 | 4.7 | 6.3 |
| Total Installed Power Consumption (Approximately) | 3,000w | 27KW | ||
| 4,000w | 32KW | |||
| 6,000w | 42KW | |||
| 12,000w | 120KW | |||
| 20,000w | 200KW | |||
| Power Requirement | AC380V50Hz ; 3P+N+PE | |||
| Total Power Protecting Level | IP54 | |||
| •Specification is subject to change without further notice. | ||||
Malaysia
