Industry leading cut quality–X-Definition
The XPR advances HyDefinition cut quality by blending new technology with refined processes for next generation, X-Definition cutting on mild steel, stainless steel, and aluminum.
• Superior stainless steel cut quality
• Consistent ISO range 2 results on thin mild steel and extended range 3 cut quality on thicker mild steel and stainless steel
• Superior results on aluminum using Vented Water Injection (VWI)
Optimized productivity and reduced operating costs
• Significantly lower operating costs than previous
generation technology
• Dramatic improvement in consumable life on mild
steel applications
• Thicker piercing capability than competitive plasma systems
• XPR automated gouging minimizes or eliminates grinding compared to carbon arc gouging producing weld-ready parts faster with wider, deeper, and cleaner gouge profiles
Engineered system optimization and ease of use
• Ramp down error protection significantly increases realized consumable life
• Automatic system monitoring and specific troubleshooting codes for improved maintenance and service prompts
• EasyConnect torch lead and one hand torch-to-receptacle connection for fast and easy change-outs
• QuickLock electrode for easy consumable replacement
• The web interface tool can be accessed via Wi-Fi and Ethernet LAN in the power supply for system monitoring and service
• Built-in IIoT via Ethernet LAN and MTConnect enables remote data access for smarter monitoring from anywhere in the world
• Manual Set-Mode is ideal for straightforward applications like gouging and off-table beveling; it retains your last setup for faster, repeatable workflows and simplifies set up and operations without the need for CNC/PLC integration
| Mild steel | mm | inches | |
|---|---|---|---|
| Pierce capacity | (argon-assist shield gas) | 45 | 1–3/4 |
| (standard air shield gas) | 50 | 2 | |
| Severance | 80 | 3–1/8 | |
| Stainless steel | |||
| Pierce capacity | 38 | 1-1/2 | |
| Severance | 75 | 3 | |
| Aluminum | |||
| Pierce capacity | 38 | 1-1/2 | |
| Severance | 50 | 2 | |
| Maximum open-circuit voltage (Uo) | 360 VDC |
| Maximum output current | 300 A |
| Maximum output power | 66.5 kW |
| Output voltage | 50–222 VDC |
| 100% duty arc voltage | 222 V |
| Duty cycle rating | 100% at 66.5 kW, 40° C (104° F) |
| Operational ambient temperature range | -10° C–40° C (14° F–104° F) |
| Power factor | 0.98 @ 66.5 kW |
| Cooling | Forced air (Class F) |
| Insulation | Class H |
| EMC emissions classification (CE models only) | Class A |
| IP Rating | IP21 |
| Unit dimensions | H = 124.8 cm (49.12") L = 123.8 cm (48.75") W = 84.2 cm (33.14") |
| Lift points |
Top lift eye weight rating 454 kg (1,000 lb.) Bottom lift truck slots |
| Console | Cutting gases | Current (A) | Cut chart thickness (mm) | Approximate cutting speed (mm/min) | Cut chart thickness (in.) | Approximate cutting speed (ipm) |
|---|---|---|---|---|---|---|
| Mild steel | ||||||
| CoreTM, VWI, and OptiMixTM | O2 plasma | 30 | 0.5 | 5348 | 0.018'' | 215 |
| O2 shield | 3 | 1153 | 0.135'' | 40 | ||
| 5 | 726 | 3/16'' | 30 | |||
| O2 plasma | 50 | 3 | 3820 | 0.105'' | 155 | |
| Air shield | 5 | 2322 | 3/16'' | 95 | ||
| 8 | 1369 | 5/16'' | 55 | |||
| O2 plasma | 80 | 3 | 5582 | 0.105'' | 225 | |
| Air shield | 6 | 3048 | 1/4'' | 110 | ||
| 12 | 1405 | 1/2'' | 55 | |||
| O2 plasma | 130 | 3 | 6502 | 0.135'' | 240 | |
| Air shield | 10 | 2680 | 3/8'' | 110 | ||
| 38 | 256 | 1-1/2'' | 10 | |||
| O2 plasma | 170 | 6 | 5080 | 1/4'' | 200 | |
| Air shield | 12 | 3061 | 1/2'' | 115 | ||
| 25 | 1175 | 1'' | 45 | |||
| 50 | 267 | 2'' | 10 | |||
| O2 plasma | 300 | 12 | 3940 | 1/2'' | 155 | |
| Air shield | 25 | 1950 | 1'' | 75 | ||
| 50 | 560 | 2'' | 21 | |||
| 80 | 165 | 3'' | 7 | |||
| Stainless steel | ||||||
| Core, VWI, and OptiMix | N2 plasma | 40 | 0.8 | 6100 | 0.036'' | 240 |
| N2 shield | 3 | 2683 | 0.105'' | 120 | ||
| 6 | 918 | 1/4'' | 32 | |||
| VWI and OptiMix | F5 plasma | 80 | 3 | 4248 | 0.135 | 140 |
| N2 shield | 6 | 1916 | 1/4'' | 70 | ||
| 12 | 864 | 1/2'' | 34 | |||
| OptiMix | H2-Ar-N2 plasma | 170 | 10 | 1975 | 3/8'' | 80 |
| N2 shield | 12 | 1735 | 1/2'' | 65 | ||
| 38 | 256 | 1-1/2'' | 10 | |||
| H2-Ar-N2 plasma | 300 | 12 | 2038 | 1/2'' | 80 | |
| N2 shield | 25 | 1040 | 1'' | 40 | ||
| 50 | 387 | 2'' | 17 | |||
| 75 | 162 | 3'' | 6 | |||
| VWI and OptiMix | N2 plasma | 300 | 12 | 2159 | 1/2'' | 85 |
| H2O shield | 25 | 1302 | 1'' | 50 | ||
| 50 | 403 | 2'' | 15 | |||
| Aluminum | ||||||
| Core, VWI, and OptiMix | Air plasma | 40 | 1.5 | 4799 | 0.036 | 240 |
| Air shield | 3 | 2596 | 1/8'' | 85 | ||
| 6 | 911 | 1/4'' | 32 | |||
| VWI and OptiMix | N2 plasma | 80 | 3 | 3820 | 1/8'' | 140 |
| H2O shield | 6 | 2203 | 1/4'' | 80 | ||
| 10 | 956 | 1/2'' | 28 | |||
| N2 plasma | 130 | 6 | 2413 | 1/4'' | 95 | |
| H2O shield | 10 | 1702 | 3/8'' | 70 | ||
| N2 | 300 | 20 | 870 | 3/4'' | 35 | |
| 12 | 2286 | 1/2'' | 90 | |||
| H2O shield | 25 | 1302 | 1'' | 50 | ||
| 50 | 524 | 2'' | 20 | |||
| OptiMix | H2-Ar-N2 plasma | 300 | 12 | 3810 | 1/2'' | 150 |
| N2 shield | 25 | 2056 | 1'' | 80 | ||
| 50 | 391 | 2'' | 15 | |||
Malaysia
