Specification:
|
Type
|
Power amplifier
|
| Power Requirement | AC mains, 120 V, 60 Hz |
| Power Consumption | 120 V /3 A |
| Output Power |
(D) 240 W RMS
(T) 220 W RMS
|
| Power Band Width |
(D) 20 - 20,000 Hz, 0.5 % THD
(T) 50 - 20,000 Hz, 0.5 % THD
|
| Frequency Response |
(D) 20 - 20,000 Hz, ±1 dB
(T) 20 - 15,000 Hz, ±1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB
|
| T.H.D | 0.01 % at 1 kHz, rated output |
| Inputs |
One Input Port: Port accepts any input module exept T-01.
One Direct Input
※ Use of direct input prohibits use of modular input port.
|
| Input Sensitivity /Impedance |
Input Port: 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input: 100 mV or 1000 mV (switchable)/10 kΩ
|
| Outputs(T)=Transformer (D)=Direct |
Main (T): 8 Ω, 25 and 70 volts, balanced
Main (D): 4 Ω, unbalanced
|
| Output Regulation(1kHz) |
(D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load
|
| S/N Ratio(Band Pass 20-20,000Hz) |
Input level switch in 0 dBV (1000 mV) position: 108 dB
Input level switch in -20 dBV (100 mV) position: 90 dB
|
| Controls |
1 Input gain control 1 Input level switch
1 Power ON/OFF switch 1 Low-Cut switch
|
| Indicators | 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED |
| Protection | Self-protection, with 2AC fuses and 2DC fuses (inside) |
| Connectors |
Input: Card-edge connector and screw-terminal strip
Output: Screw-terminal strip
AC outlet: 3-pin grounding type
AC power cord/plug: SJT, 3-prong type
|
| Temperature Range | -10 ℃ to +60 ℃ |
| Finish | Black |
| Dimensions | 420 (W) × 151.3 (H) × 334.2 (D) mm |
| Weight | 19.5 kg |
| Accessory | Volume control cover (YA-920)……1 |
| Option | Rack mounting bracket (MB-35B) |
Lihat detail lebih lanjut tentang ASIP ENGINEERING
Malaysia
