Q1: How bright is a 75W LED bulb like the AURORE AR-T3S-75?
A:The AURORE 75W LED bulb produces 6,300 lumens. This level of brightness is equivalent to a traditional 400W-500W incandescent lamp or a 120W CFL bulb, making it suitable for large spaces requiring intense illumination.
Q2: Does the AURORE 75W LED bulb fit in standard home light sockets in Malaysia?
A:Yes. It uses a standard E27 screw base, which is the most common screw-type socket in Malaysian home and commercial lighting fixtures.
Q3: What is the difference between 4000K and 6500K for this AURORE 75W LED bulb?
A:4000K (Cool White) gives off a soft, neutral white light ideal for indoor shops and offices, while 6500K (Daylight) emits a bright blue-white tint designed for high visibility in warehouses, car porches, and factories.
Q4: Can I use the AURORE 75W LED bulb outdoors?
A:Yes, provided the bulb is installed inside a weatherproof or IP-rated outdoor light fixture. The bulb itself operates within AC176-264V but should be protected from direct rain and water splashes.
Q5: Does a 75W high-power LED bulb save electricity compared to conventional bulbs?
A: Yes. While 75W is higher than regular indoor LED bulbs (typically 9W–18W), it delivers 6,300 lumens—replacing energy-draining 400W metal halide or halogen lamps while cutting energy usage by over 70%.
Q6: Is the AURORE AR-T3S-75 75W LED bulb dimmable?
A:No. This model operates on non-dimmable AC176-264V drivers. Attempting to use it with a dimmer switch may damage the internal circuit or cause flickering.
Q7: How long will the AURORE 75W E27 LED bulb last?
A:The bulb is rated for a 15,000-hour lifespan. If operated for 8 hours daily, it will last approximately 5 years.
Q8: Can I replace a 50W CFL bulb with this AURORE 75W LED bulb?
A:Yes, provided your light fixture supports an E27 base and has enough physical space for a high-power T-bulb shape. It will deliver double the light output while consuming a similar amount of energy.
Q9: Is a ballast required to run the AURORE 75W E27 LED bulb?
A:No ballast is needed. It connects directly to mains AC power (AC176-264V) through an E27 socket. If replacing old high-bay discharge lamps, bypass the existing ballast first.
.png)