Nippon Paint 5200 Interior Sealer is a styrene acrylic water-based wall sealer. It is specially formulated for interior walls to protect finishing coats against the effects of mild alkalinity and moisture from the substrate. It is designed to provide a smooth, refined base that enhances the appearance and durability of the topcoat.
Paint Type: Water-based
Product Type: Interior
Finishing: Low Sheen
Color: White
Recommended Substrates: Masonry, brick, plastering substrates, and fiberboard.
Pack Size: 5 Litres and 20 Litres.
Drying Time: * Touch Dry: 15 minutes (dependent on temperature and humidity).
Hard Dry: 1 hour (dependent on temperature and humidity).
Recoating Time: Minimum 2 hours.
Dry Film Thickness: Approximately 30 μm per coat.
Theoretical Coverage: 10 – 12 m² per litre per coat (actual coverage varies by substrate porosity).
Volume Solid: ~30% – 35%.
Shelf Life: Up to 36 months in a tightly sealed container.
Pigment: Titanium Dioxide and Mineral Extender.
Binder: Styrene Acrylic Emulsion.
Thinner: Water.
Application Method: Brush or Roller.
Thinning: Dilute with no more than 5% water (it is preferable not to dilute for best performance).
Recommended Coating System:
Sealer/Primer (1 Coat): 5200 Interior Sealer.
Topcoat (2 Coats): Nippon Paint Interior Products (e.g., Vinilex, Matex, etc.).
Surface Condition: Walls should be dry and clean (moisture content <16%, alkalinity <pH9).
Cleaning: Clean all equipment with water immediately after use.
Environmental Certifications: Complies with Singapore Green Label and SIRIM ECO-label (Low VOC).
Ready to order or need expert advice?
Contact us on WhatsApp now for fast response, latest prices, and product recommendations. Our team is ready to support your project with the right solution—quickly and hassle-free!
Malaysia
