In large buildings like hotels, hospitals, and luxury residences, the distance between the water heater and the furthest tap can be hundreds of feet. Without a Hot Water Circulation Pump, guests and residents must wait several minutes for cold water to purge from the pipes before it gets hot. This leads to massive water waste and tenant frustration. EKG (Malaysia) Sdn Bhd specializes in the installation and optimization of circulation systems that ensure hot water is available at the tap within seconds.
The pump is installed on a dedicated return line that loops from the furthest fixture back to the water heater.
Continuous Loop: The pump keeps water moving through the pipes, so it never has a chance to cool down.
Temperature Control: An aquastat or sensor detects when the water in the loop has reached the desired temperature and cycles the pump to maintain that heat.
Check Valves: These prevent "cross-flow," ensuring cold water doesn't enter the hot water lines when the pump is off.
Since these pumps move hot water, they are highly susceptible to mineral buildup (calcium/limescale). This can seize the impeller or cause the pump to run loudly. We provide Chemical Descaling to restore flow and efficiency.
Hot water causes rubber and mechanical seals to expand and contract. Over time, this leads to "weeping" leaks. We utilize high-temperature-rated EPDM or Viton seals to ensure long-term integrity.
Air bubbles can get trapped in high points of the plumbing, stopping the flow of hot water. We install and service Automatic Air Vents to keep the system air-free and silent.
If the sensor or timer is faulty, the pump may turn on and off too frequently, leading to premature motor burnout. We calibrate your control systems to ensure the pump runs only as needed.
Traditional pumps run 24/7, wasting significant electricity and fuel. We can retrofit your system with Smart Sensors or Timers that only activate the pump during peak hours or when flow is detected, slashing your utility bills by up to 50%.
A circulation pump is only as good as the pipes it serves. We provide thermal imaging and re-insulation services for your hot water headers to minimize "standby heat loss" as the water moves through the building.
We replace old, fixed-speed pumps with high-efficiency ECM (Electronically Commutated Motor) pumps. These "smart" pumps automatically adjust their speed to maintain temperature, consuming a fraction of the power of standard motors.
Turnkey MEP Capability: We manage the mechanical pump, the electrical sensors, and the plumbing manifold as a single system.
ISO-Certified Quality: Our technical team follows international standards for pressurized hot water systems to ensure safety and reliability.
Strategic Support in Selangor: We provide rapid on-site troubleshooting for hotels and commercial buildings across the Klang Valley.
Don't let your guests wait for hot water or watch your energy bills climb. Trust EKG (Malaysia) Sdn Bhd for technical, ISO-certified hot water circulation pump services. Our expert team will ensure your system is fast, efficient, and reliable.
Is your hot water taking too long or is your pump noisy? Contact us now for a free site assessment and a technical quote on our hot water system services!
更多 EKG M & E SDN. BHD. 相关资料
Malaysia
