| Supply voltage |
| Rated value (DC) |
24 V; From power module |
| Reverse polarity protection |
Yes |
| Input current |
| from supply voltage L+, max. |
Dependent on encoder |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Encoder supply |
| Number of outputs |
0; no encoder supply |
| Power loss |
| Power loss, typ. |
1.2 W |
| Address area |
| Address space per module |
| ● Address space per module, max. |
1 byte |
| Digital inputs |
| Number of digital inputs |
8 |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes; 2-wire sensors connectable |
| Input voltage |
| ● Type of input voltage |
DC |
| ● Rated value (DC) |
24 V |
| ● for signal "0" |
-30 to +5 V |
| ● for signal "1" |
+15 to +30 V |
| Input current |
| ● for signal "1", typ. |
5 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — parameterizable |
No |
| — at "0" to "1", min. |
2 ms |
| — at "0" to "1", max. |
4.5 ms |
| — at "1" to "0", min. |
2 ms |
| — at "1" to "0", max. |
4.5 ms |
| Cable length |
| ● shielded, max. |
1 000 m |
| ● unshielded, max. |
600 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
Yes |
| — permissible quiescent current (2-wire sensor), max. |
1.5 mA |
| Interrupts/diagnostics/status information |
| Diagnostics function |
No |
| Diagnostics indication LED |
| ● Status indicator digital input (green) |
Yes |
| Parameter |
| Remark |
3-byte parameter (not accessible for the user) |
| Potential separation |
| Potential separation digital inputs |
| ● between the channels |
No |
| ● between the channels and backplane bus |
Yes |
| Isolation |
| Isolation tested with |
500 V DC |
| Dimensions |
| Width |
15 mm |
| Height |
81 mm |
| Depth |
52 mm |
| Weights |
| Weight, approx. |
35 g |
Malaysia
