Cross-rail Workbench (VRU Series): 马来西亚的首选 SEM Equipment Sdn. Bhd.

详情

Model :

Features :

The Cross Guide Table features a high-precision, compact, and highly rigid finite linear motion unit with a cross roller guide installed between the high-precision machined table and base.
This product is widely used in slides for OA equipment and its peripherals, various testers, printed circuit boards, drilling machines, and other precision or automatic lathes, tool grinders, and X-ray equipment.

Advantages :

High Permissible Load
- Because the Cross Roller Guide utilizes high-precision, silent rollers arranged at standard spacing, and the rollers and V-grooves maintain line contact, the Cross Roller Slide ensures long, accurate service life within the specified tolerances.

Diverse Usage
- Because the rollers are arranged perpendicularly to each other, the guide system can evenly support loads acting on the table in all four directions.

High Corrosion Resistance
- The entire series base and table are made of stainless steel.
- Furthermore, the rails, rollers, roller cages, and screws are all made of stainless steel.
- As a result, these guide systems offer excellent corrosion resistance.

Precautions :

Rated load and rated life (Rated load in each direction)
- The rated load of each series is equal in all four directions and its value is recorded in the corresponding dimension table and expressed as C and Co.

Expressed safety factor fs
- When the cross roller table is stationary or moving, it may be subjected to unexpected external forces such as impact or inertia caused by start-up and stop.
It is necessary to consider an apparent safety factor for the applied loads.
Temperature coefficient
- If the ambient temperature of the VRU model exceeds 100°C, to consider the adverse effects of high temperature.
Load Factor
- Reciprocating machinery is often accompanied by vibration or shock during operation.
- This is particularly true during high-speed operation or during repeated starting and stopping.
Accuracy Specifications
- The dimensional tolerances for height (m) and width (w) of the VRU Cross Roller Slide, as well as the running accuracy of the base mounting surface relative to the C and D surfaces, are listed in the dimension tables for each model.

Reference values of static safety factor (f) :

Use machinery	Basic dynamic load rating	lower limit of fs
General industrial machinery	When there is no vibration or shock	1~1.3
General industrial machinery	When there is vibration or impact	2~3

Specifications :

	Main dimensions					Work surface size
Nominal model	Maximum stroke	Width W -0.2 -0.4	Height M ±0.1	Length (L)	Mass (kg)	Workbench mounting thread Hole position				Side assembly threaded hole locations
Nominal model	Maximum stroke	Width W -0.2 -0.4	Height M ±0.1	Length (L)	Mass (kg)	B	nxF	G	S	B1	G1	G2	b1	t1	S1xl	T
VRU-1025	12	30	17	25	0.08 (0.04)	10		12.5	M2	18.4	7.5	2.5	12	2.5	M2x4	11
VRU-1035	18			35	0.11 (0.05)		1x10					4.5
VRU-1045	25			45	0.15 (0.07)		2x10					6
VRU-1055	32			55	0.18 (0.09)		3x10					7.5
VRU-1065	40			65	0.21 (0.1)		4x10					8.5
VRU-1075	45			75	0.24 (0.12)		5x10					11
VRU-1085	50			85	0.27 (0.13)		6x10					13.5
VRU-2035	18	40	21	35	0.2 (0.09)	15	-	17.5	M3	25	10	3	16	3.4		14
VRU-2050	30			50	0.26 (0.13)		1x15					4.5
VRU-2065	40			65	0.34 (0.17)		2x15					7
VRU-2080	50			80	0.42 (0.21)		3x15					9.5
VRU-2095	60			95	0.5 (0.25)		4x15					12
VRU-2110	70			110	0.58 (0.29)		5x15					14.5
VRU-2125	80			125	0.66 (0.33)		6x15					17

							Base surface size Mounting hole location					Basic load rating		Static allowable moment			Accuracy μm
H	K	dxDxh	D1	m1	A	m2	B2	f1	f2	g	Roller Quantity Z	C KN	CO KN	MA N.m	MB N.m	MC N.m	ΔC	ΔD
5.5	6.5	2.55x4.1x2.5	4.1	M2	9	M2	22	18	-	3.5	5	0.46	0.61	1.52	1.25	4.12	2	4
								28	-		7	0.63	0.92	2.62	2.32	6.18
								38	-		10	0.95	1.53	4.14	4.53	10.3
								48	28		12	1.09	1.83	5.92	6.41	12.4		5
								58	38		14	1.23	2.14	8.08	8.62	14.4
								68	48		18	1.5	2.75	13.3	14	18.6
								78	58		20	1.63	3.05	16.4	17.2	20.6
6.5	7.5	3.5x6x3.5	6	M3	11	M3	30	25	-	5	5	0.84	1.09	4.32	3.55	9.77		4
								40	-		7	1.16	1.63	7.45	6.59	14.7		4
								55	-		9	1.46	2.17	11.8	10.6	19.5		5
								70	40		12	2.01	3.26	16.9	18.2	29.3
								85	55		14	2.26	3.8	23	24.5	34.2
								100	70		17	2.51	4.34	37.9	35.7	39.1	3	6
								115	85		19	2.76	4.89	46.7	44.3	44	3	6

Nominal model	Main dimensions					Work surface size
	Maximum stroke	Width W ±0.1	Height M ±0.1	Length L	Mass (kg)	Workbench mounting thread hole position				Side assembly threaded hole locations
	Maximum stroke	Width W ±0.1	Height M ±0.1	Length L	Mass (kg)	B	nxF	G	S	B1	G1	G2	b1	t1	S1xl	T
VRU-3055	30	60	28	55	0.57 (0.3)	25	-	27.5	M4	39	15	5.5	40	5.5	m3x6	18.5
VRU-3080	45			80	0.8 (0.4)		1x25					10.5
VRU-3105	60			105	1.03 (0.6)		2x25					15.5
VRU-3130	75			130	1.26 (0.7)		3x25					20.5
VRU-3155	90			155	1.49 (0.9)		4x25					25.5
VRU-3180	105			180	1.72 (1)		5x25					30.5
VRU-3205	130			205	1.95 (1.1)		6x25					30.5
VRU-4085	50	80	35	85	1.5 (0.8)	40	-	23	M5	42.5	53	10.5	55	6.5		24
VRU-4125	75			125	2.3 (1.2)		1x40					18
VRU-4165	105			165	3.1 (1.5)		2x40					22.5
VRU-4205	135			205	3.8 (1.9)		3x40					30.5
VRU-4245	155			245	4.6 (2.2)		4x40					38
VRU-4285	185			285	5.3 (2.6)		5x40					43

							Base surface dimensions Mounting hole location						Basic load rating		Static allowable moment			Accuracy (μm)
H	K	dxDxh	D1	m1	A	m2	B2	f1	f2	f3	g	Number of rollers Z	C KN	CO KN	MA N.m	MB N.m	MC N.m	ΔC	ΔD
9	10	4.5x7.5x5	7.5	M4	14.5	M4	40	35	-	-	10	6	2.71	3.67	12.2	13.9	51.3	2	5
								60	-	-		10	4.06	6.11	33.1	36.2	85.5	2	5
								85	-	-		13	4.68	7.33	64.6	59.8	103	3	6
								110	-	-		17	5.87	9.77	107	100	137
								135	-	85		20	6.98	12.2	131	138	171
								160	-	110		24	8.05	14.7	189	196	205		7
								185	85	135		26	8.57	15.9	222	230	222		7
10.5	12.5	5.5x9.5x6	9.5		18.5		60	65	-	-	10	7	5.9	8.11	64.9	57.4	162	2	5
								80	-	-		11	8.82	13.5	147	134	270	3	6
								120	-	-		14	11.5	18.9	200	214	378		7
								160	80	-	22.5	18	14	24.3	330	347	486
								200	120	-		22	16.3	29.7	492	513	594
								240	160	-		26	18.6	35.1	687	711	703

Model	Main dimensions					Work surface size
	Maximum stroke	Width (W ±0.1)	Height (M ±0.1)	Length (L)	Quality (kg)	Workbench mounting threaded holes set				Side assembly threaded hole locations
	Maximum stroke	Width (W ±0.1)	Height (M ±0.1)	Length (L)	Quality (kg)	B	nXF	G	S	b1	b2	t1	t2	S1×l	T
VRU-6110	60	100	45	110	3.2 (1.7)	50	-	55	M6	60	92	8	15	M4 X 8	31
VRU-6160	95			160	4.6 (2.5)		1 × 50
VRU-6210	130			210	6 (3.2)		2×50
VRU-6260	165			260	7.4 (4)		3×50
VRU-6310	200			310	8.7 (4.8)		4×50
VRU-6360	235			360	10.1 (5.6)		5×50
VRU-6410	265			410	11.5 (6.4)		6×50
VRU-9210	130	145	60	210	12 (7.1)		-	105	M8	90	135	11	20		43
VRU-9310	180			310	17.6 (7.9)		1 × 100
VRU-9410	350			410	23.2 (-)		2 × 100
VRU-9510	450			510	28.8 (-)		3×100
VRU-9610	550			610	34.4 (-)		854×100
VRU-9710	650			710	40 (-)		5×100
VRU-9810	750			810	45.6 (-)		6×100
VRU-9910	850			910	51.2 (-)		7×100
VRU-91010	950			1010	56.8 (-)		8 × 100

			Base surface dimensions Mounting hole location							Basic load rating		Static allowable moment			Accuracy (μm)
H	K	dxDxh	B2	f1	f2	f3	f4	g	Number of rollers Z	C KN	CO KN	MA N.m	MB N.m	MC N.m	ΔC	ΔD
13	15	7×11× 7	60	90	-	-	-	10	6	16.4	22.7	150	172	510	3	6
				140	-	-	-		9	20.5	30.2	410	367	680	3	6
				190	-	90	-		13	28.2	45.3	800	740	1020	3	7
				240	-	140	-		16	35.3	60.5	1040	1100	1360	3	7
				290	-	190	-		19	38.8	68	1630	1540	1530	4	8
				340	140	240	-		22	45.3	83.1	1970	2050	1870	4	8
				390	190	290	-		26	51.6	98.3	2750	2840	2210	4	8
16	21	9×14× 9	90	100	-	-	-	55	9	52.3	75.8	1440	1290	2730	3	7
				200	-	-	-		14	81.1	133	2810	2990	4780	3	7
				300	-	100	-		15	81.1	133	3660	3420	4780	4	8
				400	-	200	-		19	98.7	171	5710	5410	6140	4	8
				500	100	300	-		22	115	208	6910	7200	7500	4	9
				600	200	400	-		26	131	246	9640	9980	8870	4	9
				700	300	500	100		29	139	265	12800	12400	9550	5	10
				800	400	600	200		33	155	303	16500	15900	10900	5	10
				900	500	700	300		37	169	341	20500	20000	12300	5	10

Materials and Surface Treatment

VRUNi/Cr
	Material	hardness	Surface treatment
Mesa	45# steel	-	Chemical nickel plating/low temperature black chromium plating
Base	Gcr15	HRC58~	Chemical nickel plating/low temperature black chrome plating
Track	Gcr15	HRC58~	Chemical nickel plating/low temperature black chromium plating
Roller	Gcr15	HRC60~	-
Cage	SUS304	-	-