Devcon Plastic Steel® Putty (Repair 10110) – 453g
Overview:
A high-performance steel-filled epoxy compound designed for repairing worn or damaged steel parts and machinery. Once cured, it can be drilled, tapped, machined, sanded, or painted for a professional-grade finish. Ideal for metal bonding, rebuilding, and surface restoration applications.
Steel-filled epoxy for permanent repairs
Waterproof and chemical resistant
Sandable, machinable, and paintable
Excellent gap-filling properties
Bonds to steel, aluminum, and other metals
Repair cracks, chips, and worn surfaces
Rebuild machinery, tools, vehicles, and appliances
Fill voids and make holding fixtures
Bonds strongly to itself and other metals
Ensure all surfaces are clean, dry, and free of oil, grease, and dust. For best adhesion, roughen metal surfaces with sandpaper or a wire brush before applying.
Mix resin and hardener thoroughly in 2.5:1 ratio until color is uniform.
Apply to prepared surfaces immediately.
Avoid applying on oily or greasy areas.
For non-bonding areas, lightly coat with Vaseline or oil.
Metal, Ceramic, Glass: Heat above 170°C to weaken; sand, file, or drill if necessary.
Fabric/Wood: Soak in isopropyl alcohol, acetone, or paint stripper (test first on a small area).
Refer to Material Safety Data Sheet (MSDS) before use.
Skin Contact: Wipe off immediately; wash with soap and water.
Eye Contact: Rinse with water for 15 minutes and seek medical attention.
Mix Ratio: 2.5 : 1
Weight: 1 lb ≈ 453 g
Color: Dark gray steel-filled epoxy
Brand Origin: Devcon (USA)
Malaysia
